merged jrun and gwynms merb changes into main webrat code

.gitignore

@@ -1,4 +1,5 @@
 coverage
+.DS_Store
 pkg
 doc
 ri

README.txt

@@ -65,7 +65,10 @@ A test written with Webrat can handle these changes to these without any modific
 Install
 -------
 
-To install the latest release:
+* Rails >= 1.2.6 or Merb edge
+* Hpricot >= 0.6
+* Rails integration tests in Test::Unit _or_
+* RSpec stories (using an RSpec version >= revision 2997)
 
     sudo gem install webrat
 
@@ -75,6 +78,13 @@ In your stories/helper.rb:
   
 You could also unpack the gem into vendor/plugins.
 
+To avoid losing sessions, you need this in environments/test.rb:
+
+Merb::Config.use do |c|
+  c[:session_store] = 'memory' 
+end  
+
+== HISTORY:
 Requirements
 ------------
 

lib/boot_merb.rb

@@ -0,0 +1,127 @@
+module Webrat
+  module MerbTest
+
+    #Our own redirect actions defined below, to deal with the fact that we need to store
+    #a controller reference.
+
+    def current_page
+      @current_page ||= Webrat::Page.new(self)
+    end
+
+    def current_page=(new_page)
+      @current_page = new_page
+    end
+
+    # Issues a GET request for a page, follows any redirects, and verifies the final page
+    # load was successful.
+    #
+    # Example:
+    #   visits "/"
+    def visits(*args)
+      @current_page = Webrat::Page.new(self, *args)
+    end
+
+    def save_and_open_page
+      current_page.save_and_open
+    end
+
+    [:reloads, :fills_in, :clicks_button, :selects, :chooses, :checks, :unchecks, :clicks_link, :clicks_link_within, :clicks_put_link, :clicks_get_link, :clicks_post_link, :clicks_delete_link].each do |method_name|
+      define_method(method_name) do |*args|
+        current_page.send(method_name, *args)
+      end
+    end
+
+    #Session defines the following (used by webrat), but RspecStory doesn't. Merb's get/put/delete return a controller,
+    #which is where we get our status and response from. 
+    #
+    #We have to preserve cookies like this, or the session is lost.
+    #
+    #While (in a web application) a PUT is modelled as a POST with a parameter _method, 
+    #this close to the metal we need to make sure that we actually hit the underlying 'put' method,
+    #so we rewrite 'method'.
+    def request_via_redirect(method,path,parameters={},headers={})
+      method = parameters["_method"] if !parameters["_method"].blank?
+      mycookies = defined?(@controller) ? @controller.cookies : nil #will be nil if no requests yet
+      begin
+        @controller=self.send(method, path, parameters, headers) do |new_controller|
+          new_controller.cookies = mycookies
+        end
+      rescue => exception
+        raise unless exception.kind_of?(Merb::ControllerExceptions::Base)
+        #Now we want to go one level below 'post' to build the request ourselves, then send it to the controller
+        exception_klass = exception.class
+        klass = ::Exceptions rescue Merb::Controller
+        request = fake_request
+        request.params[:exception] = exception
+        request.params[:action] = exception_klass.name
+        @controller=dispatch_request(request, klass, exception_klass.name)
+      end
+  
+      follow_redirect! while redirect?
+      status
+    end
+
+    def get_via_redirect(path, parameters = {}, headers = {})
+      request_via_redirect(:get,path,parameters,headers)
+    end
+
+    def put_via_redirect(path, parameters = {}, headers = {})
+      request_via_redirect(:put,path,parameters,headers)
+    end
+
+    def post_via_redirect(path, parameters = {}, headers = {})
+      request_via_redirect(:post,path,parameters,headers)
+    end  
+
+    def delete_via_redirect(path, parameters = {}, headers = {})
+      request_via_redirect(:delete,path,parameters,headers)
+    end  
+
+    def follow_redirect!
+      mycookies = @controller.cookies rescue nil
+      @controller=get @controller.headers["Location"] do |new_controller|
+        new_controller.cookies=mycookies
+      end
+    end
+
+    def redirect?
+      [307, *(300..305)].include?(status)
+    end
+
+    def status
+      @controller.status
+    end
+
+    def response
+      @controller #things like @controller.body will work.
+    end
+
+    def assert_response(resp)
+      if resp == :success
+        response.should be_successful
+      else
+        raise "assert_response #{resp.inspect} is not supported"
+      end
+    end 
+
+  end
+end
+
+class Application < Merb::Controller
+  def cookies=(newcookies)
+    @_cookies = newcookies
+  end
+end
+
+
+#Other utilities used by Webrat that are present in Rails but not Merb. We can require heavy dependencies
+#here because we're only loaded in Test mode. 
+require 'strscan'
+require 'cgi'
+require File.join(File.dirname(__FILE__), "merb_support", "param_parser.rb")
+require File.join(File.dirname(__FILE__), "merb_support", "url_encoded_pair_parser.rb")
+require File.join(File.dirname(__FILE__), "merb_support", "indifferent_access.rb")
+require File.join(File.dirname(__FILE__), "merb_support", "support.rb")
+
+
+

lib/boot_rails.rb

@@ -0,0 +1,39 @@
+module ActionController
+  module Integration
+    class Session
+      
+      unless instance_methods.include?("put_via_redirect")
+        include Webrat::RedirectActions
+      end
+
+      def current_page
+        @current_page ||= Webrat::Page.new(self)
+      end
+      
+      def current_page=(new_page)
+        @current_page = new_page
+      end
+      
+      # Issues a GET request for a page, follows any redirects, and verifies the final page
+      # load was successful.
+      #
+      # Example:
+      #   visits "/"
+      def visits(*args)
+        @current_page = Webrat::Page.new(self, *args)
+      end
+
+      def save_and_open_page
+        current_page.save_and_open
+      end
+      
+      [:reloads, :fills_in, :clicks_button, :selects, :chooses, :checks, :unchecks, :clicks_link, :clicks_link_within, :clicks_put_link, :clicks_get_link, :clicks_post_link, :clicks_delete_link].each do |method_name|
+        define_method(method_name) do |*args|
+          current_page.send(method_name, *args)
+        end
+      end
+      
+    end
+  end
+end
+

lib/merb_support/indifferent_access.rb

@@ -0,0 +1,125 @@
+# This class has dubious semantics and we only have it so that
+# people can write params[:key] instead of params['key']
+# and they get the same value for both keys.
+class HashWithIndifferentAccess < Hash
+  def initialize(constructor = {})
+    if constructor.is_a?(Hash)
+      super()
+      update(constructor)
+    else
+      super(constructor)
+    end
+  end
+
+  def default(key = nil)
+    if key.is_a?(Symbol) && include?(key = key.to_s)
+      self[key]
+    else
+      super
+    end
+  end
+
+  alias_method :regular_writer, :[]= unless method_defined?(:regular_writer)
+  alias_method :regular_update, :update unless method_defined?(:regular_update)
+
+  #
+  # Assigns a new value to the hash.
+  #
+  # Example:
+  #
+  #   hash = HashWithIndifferentAccess.new
+  #   hash[:key] = "value"
+  #
+  def []=(key, value)
+    regular_writer(convert_key(key), convert_value(value))
+  end
+
+  # 
+  # Updates the instantized hash with values from the second.
+  # 
+  # Example:
+  # 
+  #   >> hash_1 = HashWithIndifferentAccess.new
+  #   => {}
+  # 
+  #   >> hash_1[:key] = "value"
+  #   => "value"
+  # 
+  #   >> hash_2 = HashWithIndifferentAccess.new
+  #   => {}
+  # 
+  #   >> hash_2[:key] = "New Value!"
+  #   => "New Value!"
+  # 
+  #   >> hash_1.update(hash_2)
+  #   => {"key"=>"New Value!"}
+  # 
+  def update(other_hash)
+    other_hash.each_pair { |key, value| regular_writer(convert_key(key), convert_value(value)) }
+    self
+  end
+
+  alias_method :merge!, :update
+
+  # Checks the hash for a key matching the argument passed in
+  def key?(key)
+    super(convert_key(key))
+  end
+
+  alias_method :include?, :key?
+  alias_method :has_key?, :key?
+  alias_method :member?, :key?
+
+  # Fetches the value for the specified key, same as doing hash[key]
+  def fetch(key, *extras)
+    super(convert_key(key), *extras)
+  end
+
+  # Returns an array of the values at the specified indicies. 
+  def values_at(*indices)
+    indices.collect {|key| self[convert_key(key)]}
+  end
+
+  # Returns an exact copy of the hash.
+  def dup
+    HashWithIndifferentAccess.new(self)
+  end
+
+  # Merges the instantized and the specified hashes together, giving precedence to the values from the second hash
+  # Does not overwrite the existing hash.
+  def merge(hash)
+    self.dup.update(hash)
+  end
+
+  # Removes a specified key from the hash.
+  def delete(key)
+    super(convert_key(key))
+  end
+
+  def stringify_keys!; self end
+  def symbolize_keys!; self end
+  def to_options!; self end
+
+  # Convert to a Hash with String keys.
+  def to_hash
+    Hash.new(default).merge(self)
+  end
+
+  protected
+    def convert_key(key)
+      key.kind_of?(Symbol) ? key.to_s : key
+    end
+
+    def convert_value(value)
+      case value
+      when Hash
+        value.with_indifferent_access
+      when Array
+        value.collect { |e| e.is_a?(Hash) ? e.with_indifferent_access : e }
+      else
+        value
+      end
+    end
+end
+
+

lib/merb_support/param_parser.rb

@@ -0,0 +1,17 @@
+module Webrat
+  class ParamParser
+    def self.parse_query_parameters(query_string)
+      return {} if query_string.blank?
+
+      pairs = query_string.split('&').collect do |chunk|
+        next if chunk.empty?
+        key, value = chunk.split('=', 2)
+        next if key.empty?
+        value = value.nil? ? nil : CGI.unescape(value)
+        [ CGI.unescape(key), value ]
+      end.compact
+
+      UrlEncodedPairParser.new(pairs).result
+    end
+  end
+end

lib/merb_support/support.rb

@@ -0,0 +1,12 @@
+class Hash
+  def with_indifferent_access
+    hash = HashWithIndifferentAccess.new(self)
+    hash.default = self.default
+    hash
+  end
+end
+class NilClass
+  def to_param
+    nil
+  end
+end

lib/merb_support/url_encoded_pair_parser.rb

@@ -0,0 +1,93 @@
+class UrlEncodedPairParser < StringScanner #:nodoc:
+    attr_reader :top, :parent, :result
+
+    def initialize(pairs = [])
+      super('')
+      @result = {}
+      pairs.each { |key, value| parse(key, value) }
+    end
+
+    KEY_REGEXP = %r{([^\[\]=&]+)}
+    BRACKETED_KEY_REGEXP = %r{\[([^\[\]=&]+)\]}
+
+    # Parse the query string
+    def parse(key, value)
+      self.string = key
+      @top, @parent = result, nil
+
+      # First scan the bare key
+      key = scan(KEY_REGEXP) or return
+      key = post_key_check(key)
+
+      # Then scan as many nestings as present
+      until eos?
+        r = scan(BRACKETED_KEY_REGEXP) or return
+        key = self[1]
+        key = post_key_check(key)
+      end
+
+      bind(key, value)
+    end
+
+    private
+      # After we see a key, we must look ahead to determine our next action. Cases:
+      #
+      #   [] follows the key. Then the value must be an array.
+      #   = follows the key. (A value comes next)
+      #   & or the end of string follows the key. Then the key is a flag.
+      #   otherwise, a hash follows the key.
+      def post_key_check(key)
+        if scan(/\[\]/) # a[b][] indicates that b is an array
+          container(key, Array)
+          nil
+        elsif check(/\[[^\]]/) # a[b] indicates that a is a hash
+          container(key, Hash)
+          nil
+        else # End of key? We do nothing.
+          key
+        end
+      end
+
+      # Add a container to the stack.
+      def container(key, klass)
+        type_conflict! klass, top[key] if top.is_a?(Hash) && top.key?(key) && ! top[key].is_a?(klass)
+        value = bind(key, klass.new)
+        type_conflict! klass, value unless value.is_a?(klass)
+        push(value)
+      end
+
+      # Push a value onto the 'stack', which is actually only the top 2 items.
+      def push(value)
+        @parent, @top = @top, value
+      end
+
+      # Bind a key (which may be nil for items in an array) to the provided value.
+      def bind(key, value)
+        if top.is_a? Array
+          if key
+            if top[-1].is_a?(Hash) && ! top[-1].key?(key)
+              top[-1][key] = value
+            else
+              top << {key => value}.with_indifferent_access
+              push top.last
+              value = top[key]
+            end
+          else
+            top << value
+          end
+        elsif top.is_a? Hash
+          key = CGI.unescape(key)
+          parent << (@top = {}) if top.key?(key) && parent.is_a?(Array)
+          top[key] ||= value
+          return top[key]
+        else
+          raise ArgumentError, "Don't know what to do: top is #{top.inspect}"
+        end
+
+        return value
+      end
+
+      def type_conflict!(klass, value)
+        raise TypeError, "Conflicting types for parameter containers. Expected an instance of #{klass} but found an instance of #{value.class}. This can be caused by colliding Array and Hash parameters like qs[]=value&qs[key]=value. (The parameters received were #{value.inspect}.)"
+      end
+end

lib/webrat.rb

@@ -1,5 +1,8 @@
 module Webrat
-  VERSION = '0.2.1'
+  VERSION = '0.2.2'
+  def self.root
+    defined?(RAILS_ROOT) ? RAILS_ROOT : Merb.root
+  end
 end
 
 require "rubygems"
@@ -7,3 +10,9 @@ require "active_support"
 
 require File.dirname(__FILE__) + "/webrat/core"
 require File.dirname(__FILE__) + "/webrat/rails" if defined?(RAILS_ENV)
+
+if defined?(Merb)
+  require File.join(File.dirname(__FILE__), "boot_merb.rb")
+else
+  require File.join(File.dirname(__FILE__), "boot_rails.rb")
+end

lib/webrat/core/field.rb

@@ -3,18 +3,17 @@ module Webrat
     
     def self.class_for_element(element)
       if element.name == "input"
-        if %w[submit image].include?(element["type"])
+        if %w[submit image button].include?(element["type"])
           field_class = "button"
         else
-          field_class = element["type"] || "text"
+          field_class = element["type"] || "text" #default type; 'type' attribute is not mandatory
         end
       else
         field_class = element.name
       end
-      
       Webrat.const_get("#{field_class.capitalize}Field")
-    rescue NameError
+    #rescue NameError
-      raise "Invalid field element: #{element.inspect}"
+    #  raise "Invalid field element: #{element.inspect}"
     end
     
     def initialize(form, element)
@@ -108,10 +107,10 @@ module Webrat
     def param_parser
       if defined?(CGIMethods)
         CGIMethods
-      else
+      elsif defined?(ActionController::AbstractRequest)
-        require "action_controller"
-        require "action_controller/integration"
         ActionController::AbstractRequest
+      else
+        Webrat::ParamParser #used for Merb
       end
     end
     
@@ -142,6 +141,14 @@ module Webrat
       @element["value"] =~ /^\W*#{Regexp.escape(value.to_s)}/i || matches_text?(value) || matches_alt?(value)
     end
     
+    def matches_id?(id)
+      @element["id"] =~ /^\W*#{Regexp.escape(id.to_s)}/i
+    end
+    
+    def matches_caption?(value)
+      @element.innerHTML =~ /^\W*#{Regexp.escape(value.to_s)}/i
+    end
+
     def to_param
       return nil if @value.nil?
       super

lib/webrat/core/form.rb

@@ -33,10 +33,19 @@ module Webrat
       
       possible_buttons = fields_by_type([ButtonField])
       
+      possible_buttons.each do |possible_button|
+        return possible_button if possible_button.matches_id?(value)
+      end
+      
       possible_buttons.each do |possible_button|
         return possible_button if possible_button.matches_value?(value)
       end
       
+      #If nothing matched on value, try by name. 
+      possible_buttons.each do |possible_button|
+        return possible_button if possible_button.matches_caption?(value)
+      end
+      
       nil
     end
 
@@ -45,7 +54,7 @@ module Webrat
       
       @fields = []
       
-      (@element / "button, input, textarea, select").each do |field_element|
+      (@element / "input, textarea, select, button").each do |field_element|
         @fields << Field.class_for_element(field_element).new(self, field_element)
       end
       
@@ -123,7 +132,7 @@ module Webrat
     def merge_hash_values(a, b) # :nodoc:
       a.keys.each do |k|
         if b.has_key?(k)
-          case [a[k], b[k]].map(&:class)
+          case [a[k].class, b[k].class]
           when [Hash, Hash]
             a[k] = merge_hash_values(a[k], b[k])
             b.delete(k)

lib/webrat/core/logging.rb

@@ -3,12 +3,14 @@ module Webrat
     
     def debug_log(message) # :nodoc:
       return unless logger
-      logger.debug(message)
+      logger.debug message
     end
 
     def logger # :nodoc:
       if defined? RAILS_DEFAULT_LOGGER
         RAILS_DEFAULT_LOGGER
+      elsif defined? Merb
+        Merb.logger
       else
         nil
       end

lib/webrat/core/scope.rb

@@ -82,10 +82,22 @@ module Webrat
     # along with the form. An optional <tt>content_type</tt> may be given.
     #
     # Example:
+<<<<<<< HEAD:lib/webrat/core/scope.rb
     #   attaches_file "Resume", "/path/to/the/resume.txt"
     #   attaches_file "Photo", "/path/to/the/image.png", "image/png"
     def attaches_file(id_or_name_or_label, path, content_type = nil)
       find_field(id_or_name_or_label, FileField).set(path, content_type)
+=======
+    #   save_and_open
+    def save_and_open
+      return unless File.exist?(Webrat.root + "/tmp")
+
+      filename = "webrat-#{Time.now.to_i}.html"
+      File.open(Webrat.root + "/tmp/#{filename}", "w") do |f|
+        f.write response.body
+      end
+      `open tmp/#{filename}`
+>>>>>>> 300880db2f0d50a3e2d7b171eb9745cb50e1c534:lib/webrat/page.rb
     end
 
     alias_method :attach_file, :attaches_file

spec/api/fills_in_spec.rb

@@ -145,6 +145,18 @@ describe "fills_in" do
     @session.clicks_button
   end
 
+  def test_should_work_without_input_type
+    @response.stubs(:body).returns(<<-EOS)
+      <form method="post" action="/login">
+        <input id="user_email" name="user[email]"  />
+        <input type="submit" />
+      </form>
+    EOS
+    @session.expects(:post_via_redirect).with("/login", "user" => {"email" => "foo@example.com"})
+    @session.fills_in "user[email]", :with => "foo@example.com"
+    @session.clicks_button
+  end
+  
   it "should work with symbols" do
     @session.response_body = <<-EOS
       <form method="post" action="/login">

spec/spec_helper.rb

@@ -4,11 +4,10 @@ require "spec"
 # gem install redgreen for colored test output
 begin require "redgreen" unless ENV['TM_CURRENT_LINE']; rescue LoadError; end
 
-require "active_support"
+if ["rails","merb"].include?(ENV["TEST_MODE"])
-
+  require File.join(File.dirname(__FILE__), "helper_#{ENV["TEST_MODE"]}.rb")
-silence_warnings do
+else
-  require "action_controller"
+  raise "Please set the environment variable TEST_MODE to either 'rails' or 'merb'."
-  require "action_controller/integration"
 end
   
 require File.expand_path(File.dirname(__FILE__) + "/../lib/webrat")

test/helper_merb.rb

@@ -0,0 +1,11 @@
+require 'merb-core'
+require 'merb_stories'
+module Merb
+  module Test
+    class RspecStory
+      def flunk(message)
+        raise message
+      end  
+    end
+ end
+end

test/helper_rails.rb

@@ -0,0 +1,11 @@
+require "active_support"
+silence_warnings do
+  require "action_controller"
+  require "action_controller/integration"
+end
+
+class ActionController::Integration::Session
+  def flunk(message)
+    raise message
+  end
+end