engine/config/initializers/devise.rb

module Locomotive
  module Devise

    class FailureApp < ::Devise::FailureApp

      include ::Locomotive::Engine.routes.url_helpers

      def redirect_url
        new_locomotive_account_session_path
      end

    end

  end
end

# Devise.mailer[:locomotive_account] = 'Locomotive::DeviseMailer'

# require 'devise'
#
# puts "overidding Devise::Mailer"
#
# # The devise mailer has also to know about the urls built in the engine
# class Devise::Mailer < ::ActionMailer::Base
#   include Locomotive::Engine.routes.url_helpers
# end

# require 'locomotive'
#
# # Use this hook to configure devise mailer, warden hooks and so forth. The first
# # four configuration values can also be set straight in your models.
# Devise.setup do |config|
#   # ==> Mailer Configuration
#   # Configure the e-mail address which will be shown in DeviseMailer.
#   config.mailer_sender = Locomotive.config.mailer_sender
#
#   # Configure the class responsible to send e-mails.
#   # config.mailer = "Devise::Mailer"
#
#   # ==> ORM configuration
#   # Load and configure the ORM. Supports :active_record (default) and
#   # :mongoid (bson_ext recommended) by default. Other ORMs may be
#   # available as additional gems.
#   require 'devise/orm/mongoid'
#
#   # ==> Configuration for any authentication mechanism
#   # Configure which keys are used when authenticating a user. The default is
#   # just :email. You can configure it to use [:username, :subdomain], so for
#   # authenticating a user, both parameters are required. Remember that those
#   # parameters are used only when authenticating and not when retrieving from
#   # session. If you need permissions, you should implement that in a before filter.
#   # You can also supply a hash where the value is a boolean determining whether
#   # or not authentication should be aborted when the value is not present.
#   # config.authentication_keys = [ :email ]
#
#   # Configure parameters from the request object used for authentication. Each entry
#   # given should be a request method and it will automatically be passed to the
#   # find_for_authentication method and considered in your model lookup. For instance,
#   # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
#   # The same considerations mentioned for authentication_keys also apply to request_keys.
#   # config.request_keys = []
#
#   # Configure which authentication keys should be case-insensitive.
#   # These keys will be downcased upon creating or modifying a user and when used
#   # to authenticate or find a user. Default is :email.
#   config.case_insensitive_keys = [ :email ]
#
#   # Tell if authentication through request.params is enabled. True by default.
#   # config.params_authenticatable = true
#
#   # Tell if authentication through HTTP Basic Auth is enabled. False by default.
#   # config.http_authenticatable = false
#
#   # If http headers should be returned for AJAX requests. True by default.
#   # config.http_authenticatable_on_xhr = true
#
#   # The realm used in Http Basic Authentication. "Application" by default.
#   # config.http_authentication_realm = "Application"
#
#   # ==> Configuration for :database_authenticatable
#   # For bcrypt, this is the cost for hashing the password and defaults to 10. If
#   # using other encryptors, it sets how many times you want the password re-encrypted.
#   config.stretches = 10
#
#   # Setup a pepper to generate the encrypted password.
#   # config.pepper = "de368d6a1517489510a2ae145328ff1c238f03b02da8f57032936a353835e2ca20561decfb5f7bfafad095fa73cee55b101ed11a0d0f913429d3d9bd114d810e"
#
#   # ==> Configuration for :confirmable
#   # The time you want to give your user to confirm his account. During this time
#   # he will be able to access your application without confirming. Default is 0.days
#   # When confirm_within is zero, the user won't be able to sign in without confirming.
#   # You can use this to let your user access some features of your application
#   # without confirming the account, but blocking it after a certain period
#   # (ie 2 days).
#   # config.confirm_within = 2.days
#
#   # Defines which key will be used when confirming an account
#   # config.confirmation_keys = [ :email ]
#
#   # ==> Configuration for :rememberable
#   # The time the user will be remembered without asking for credentials again.
#   config.remember_for = 2.weeks
#
#   # If true, a valid remember token can be re-used between multiple browsers.
#   # config.remember_across_browsers = true
#
#   # If true, extends the user's remember period when remembered via cookie.
#   # config.extend_remember_period = false
#
#   # If true, uses the password salt as remember token. This should be turned
#   # to false if you are not using database authenticatable.
#   config.use_salt_as_remember_token = true
#
#   # Options to be passed to the created cookie. For instance, you can set
#   # :secure => true in order to force SSL only cookies.
#   # config.cookie_options = {}
#
#   # ==> Configuration for :validatable
#   # Range for password length. Default is 6..128.
#   # config.password_length = 6..128
#
#   # Regex to use to validate the email address
#   # config.email_regexp = /\A([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})\z/i
#
#   # ==> Configuration for :timeoutable
#   # The time you want to timeout the user session without activity. After this
#   # time the user will be asked for credentials again. Default is 30 minutes.
#   # config.timeout_in = 30.minutes
#
#   # ==> Configuration for :lockable
#   # Defines which strategy will be used to lock an account.
#   # :failed_attempts = Locks an account after a number of failed attempts to sign in.
#   # :none            = No lock strategy. You should handle locking by yourself.
#   # config.lock_strategy = :failed_attempts
#
#   # Defines which key will be used when locking and unlocking an account
#   # config.unlock_keys = [ :email ]
#
#   # Defines which strategy will be used to unlock an account.
#   # :email = Sends an unlock link to the user email
#   # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
#   # :both  = Enables both strategies
#   # :none  = No unlock strategy. You should handle unlocking by yourself.
#   # config.unlock_strategy = :both
#
#   # Number of authentication tries before locking an account if lock_strategy
#   # is failed attempts.
#   # config.maximum_attempts = 20
#
#   # Time interval to unlock the account if :time is enabled as unlock_strategy.
#   # config.unlock_in = 1.hour
#
#   # ==> Configuration for :recoverable
#   #
#   # Defines which key will be used when recovering the password for an account
#   # config.reset_password_keys = [ :email ]
#
#   # Time interval you can reset your password with a reset password key.
#   # Don't put a too small interval or your users won't have the time to
#   # change their passwords.
#   config.reset_password_within = 2.hours
#
#   # ==> Configuration for :encryptable
#   # Allow you to use another encryption algorithm besides bcrypt (default). You can use
#   # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
#   # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
#   # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
#   # REST_AUTH_SITE_KEY to pepper)
#   # config.encryptor = :sha1
#
#   # ==> Configuration for :token_authenticatable
#   # Defines name of the authentication token params key
#   # config.token_authentication_key = :auth_token
#
#   # If true, authentication through token does not store user in session and needs
#   # to be supplied on each request. Useful if you are using the token as API token.
#   # config.stateless_token = false
#
#   # ==> Scopes configuration
#   # Turn scoped views on. Before rendering "sessions/new", it will first check for
#   # "users/sessions/new". It's turned off by default because it's slower if you
#   # are using only default views.
#   config.scoped_views = true
#
#   # Configure the default scope given to Warden. By default it's the first
#   # devise role declared in your routes (usually :user).
#   config.default_scope = :account
#
#   # Configure sign_out behavior.
#   # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
#   # The default is true, which means any logout action will sign out all active scopes.
#   # config.sign_out_all_scopes = true
#
#   # ==> Navigation configuration
#   # Lists the formats that should be treated as navigational. Formats like
#   # :html, should redirect to the sign in page when the user does not have
#   # access, but formats like :xml or :json, should return 401.
#   #
#   # If you have any extra navigational formats, like :iphone or :mobile, you
#   # should add them to the navigational formats lists.
#   #
#   # The :"*/*" and "*/*" formats below is required to match Internet
#   # Explorer requests.
#   # config.navigational_formats = [:"*/*", "*/*", :html]
#
#   # The default HTTP method used to sign out a resource. Default is :get.
#   # config.sign_out_via = :get
#
#   # ==> OmniAuth
#   # Add a new OmniAuth provider. Check the wiki for more information on setting
#   # up on your models and hooks.
#   # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
#
#   # ==> Warden configuration
#   # If you want to use other strategies, that are not supported by Devise, or
#   # change the failure app, you can configure them inside the config.warden block.
#   #
#   # config.warden do |manager|
#   #   manager.failure_app   = AnotherApp
#   #   manager.intercept_401 = false
#   #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
#   # end
# end