engine/config/initializers/devise.rb

197 lines
8.7 KiB
Ruby
Raw Normal View History

require 'locomotive'
2010-04-09 09:23:41 +00:00
# Use this hook to configure devise mailer, warden hooks and so forth. The first
# four configuration values can also be set straight in your models.
Devise.setup do |config|
# ==> Mailer Configuration
2010-04-09 09:23:41 +00:00
# Configure the e-mail address which will be shown in DeviseMailer.
config.mailer_sender = Locomotive.config.mailer_sender
2010-04-09 09:23:41 +00:00
# Configure the class responsible to send e-mails.
# config.mailer = "Devise::Mailer"
# ==> ORM configuration
# Load and configure the ORM. Supports :active_record (default) and
# :mongoid (bson_ext recommended) by default. Other ORMs may be
# available as additional gems.
require 'devise/orm/mongoid'
2010-04-09 09:23:41 +00:00
# ==> Configuration for any authentication mechanism
# Configure which keys are used when authenticating a user. The default is
2010-04-09 09:23:41 +00:00
# just :email. You can configure it to use [:username, :subdomain], so for
# authenticating a user, both parameters are required. Remember that those
2010-04-09 09:23:41 +00:00
# parameters are used only when authenticating and not when retrieving from
# session. If you need permissions, you should implement that in a before filter.
# You can also supply a hash where the value is a boolean determining whether
# or not authentication should be aborted when the value is not present.
2010-04-09 09:23:41 +00:00
# config.authentication_keys = [ :email ]
# Configure parameters from the request object used for authentication. Each entry
# given should be a request method and it will automatically be passed to the
# find_for_authentication method and considered in your model lookup. For instance,
# if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
# The same considerations mentioned for authentication_keys also apply to request_keys.
# config.request_keys = []
# Configure which authentication keys should be case-insensitive.
# These keys will be downcased upon creating or modifying a user and when used
# to authenticate or find a user. Default is :email.
config.case_insensitive_keys = [ :email ]
2010-04-09 09:23:41 +00:00
# Tell if authentication through request.params is enabled. True by default.
# config.params_authenticatable = true
# Tell if authentication through HTTP Basic Auth is enabled. False by default.
# config.http_authenticatable = false
# If http headers should be returned for AJAX requests. True by default.
# config.http_authenticatable_on_xhr = true
2010-04-09 09:23:41 +00:00
# The realm used in Http Basic Authentication. "Application" by default.
2010-04-09 09:23:41 +00:00
# config.http_authentication_realm = "Application"
# ==> Configuration for :database_authenticatable
# For bcrypt, this is the cost for hashing the password and defaults to 10. If
# using other encryptors, it sets how many times you want the password re-encrypted.
config.stretches = 10
2010-04-09 09:23:41 +00:00
# Setup a pepper to generate the encrypted password.
# config.pepper = "de368d6a1517489510a2ae145328ff1c238f03b02da8f57032936a353835e2ca20561decfb5f7bfafad095fa73cee55b101ed11a0d0f913429d3d9bd114d810e"
2010-04-09 09:23:41 +00:00
# ==> Configuration for :confirmable
# The time you want to give your user to confirm his account. During this time
# he will be able to access your application without confirming. Default is 0.days
# When confirm_within is zero, the user won't be able to sign in without confirming.
# You can use this to let your user access some features of your application
# without confirming the account, but blocking it after a certain period
# (ie 2 days).
2010-04-09 09:23:41 +00:00
# config.confirm_within = 2.days
# Defines which key will be used when confirming an account
# config.confirmation_keys = [ :email ]
2010-04-09 09:23:41 +00:00
# ==> Configuration for :rememberable
# The time the user will be remembered without asking for credentials again.
config.remember_for = 2.weeks
# If true, a valid remember token can be re-used between multiple browsers.
# config.remember_across_browsers = true
# If true, extends the user's remember period when remembered via cookie.
# config.extend_remember_period = false
# If true, uses the password salt as remember token. This should be turned
# to false if you are not using database authenticatable.
config.use_salt_as_remember_token = true
# Options to be passed to the created cookie. For instance, you can set
# :secure => true in order to force SSL only cookies.
# config.cookie_options = {}
2010-04-09 09:23:41 +00:00
# ==> Configuration for :validatable
# Range for password length. Default is 6..128.
# config.password_length = 6..128
2010-04-09 09:23:41 +00:00
# Regex to use to validate the email address
# config.email_regexp = /\A([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})\z/i
2010-04-09 09:23:41 +00:00
# ==> Configuration for :timeoutable
# The time you want to timeout the user session without activity. After this
# time the user will be asked for credentials again. Default is 30 minutes.
# config.timeout_in = 30.minutes
2010-04-09 09:23:41 +00:00
# ==> Configuration for :lockable
# Defines which strategy will be used to lock an account.
# :failed_attempts = Locks an account after a number of failed attempts to sign in.
# :none = No lock strategy. You should handle locking by yourself.
# config.lock_strategy = :failed_attempts
# Defines which key will be used when locking and unlocking an account
# config.unlock_keys = [ :email ]
2010-04-09 09:23:41 +00:00
# Defines which strategy will be used to unlock an account.
# :email = Sends an unlock link to the user email
# :time = Re-enables login after a certain amount of time (see :unlock_in below)
2010-04-09 09:23:41 +00:00
# :both = Enables both strategies
# :none = No unlock strategy. You should handle unlocking by yourself.
# config.unlock_strategy = :both
# Number of authentication tries before locking an account if lock_strategy
# is failed attempts.
# config.maximum_attempts = 20
# Time interval to unlock the account if :time is enabled as unlock_strategy.
# config.unlock_in = 1.hour
# ==> Configuration for :recoverable
#
# Defines which key will be used when recovering the password for an account
# config.reset_password_keys = [ :email ]
# Time interval you can reset your password with a reset password key.
# Don't put a too small interval or your users won't have the time to
# change their passwords.
config.reset_password_within = 2.hours
# ==> Configuration for :encryptable
# Allow you to use another encryption algorithm besides bcrypt (default). You can use
# :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
# :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
# and :restful_authentication_sha1 (then you should set stretches to 10, and copy
# REST_AUTH_SITE_KEY to pepper)
# config.encryptor = :sha1
2010-04-09 09:23:41 +00:00
# ==> Configuration for :token_authenticatable
# Defines name of the authentication token params key
# config.token_authentication_key = :auth_token
# If true, authentication through token does not store user in session and needs
# to be supplied on each request. Useful if you are using the token as API token.
# config.stateless_token = false
2010-04-09 09:23:41 +00:00
# ==> Scopes configuration
2010-04-09 09:23:41 +00:00
# Turn scoped views on. Before rendering "sessions/new", it will first check for
# "users/sessions/new". It's turned off by default because it's slower if you
2010-04-09 09:23:41 +00:00
# are using only default views.
config.scoped_views = true
2010-04-09 09:23:41 +00:00
# Configure the default scope given to Warden. By default it's the first
# devise role declared in your routes (usually :user).
2010-04-13 14:26:40 +00:00
config.default_scope = :account
2010-04-09 09:23:41 +00:00
# Configure sign_out behavior.
# Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope).
# The default is true, which means any logout action will sign out all active scopes.
# config.sign_out_all_scopes = true
# ==> Navigation configuration
# Lists the formats that should be treated as navigational. Formats like
# :html, should redirect to the sign in page when the user does not have
# access, but formats like :xml or :json, should return 401.
#
# If you have any extra navigational formats, like :iphone or :mobile, you
# should add them to the navigational formats lists.
#
# The :"*/*" and "*/*" formats below is required to match Internet
# Explorer requests.
# config.navigational_formats = [:"*/*", "*/*", :html]
# The default HTTP method used to sign out a resource. Default is :get.
# config.sign_out_via = :get
# ==> OmniAuth
# Add a new OmniAuth provider. Check the wiki for more information on setting
# up on your models and hooks.
# config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
# ==> Warden configuration
# If you want to use other strategies, that are not supported by Devise, or
# change the failure app, you can configure them inside the config.warden block.
2010-04-09 09:23:41 +00:00
#
# config.warden do |manager|
# manager.failure_app = AnotherApp
# manager.intercept_401 = false
# manager.default_strategies(:scope => :user).unshift :some_external_strategy
2010-04-09 09:23:41 +00:00
# end
end