Update README

.gitignore

@@ -4,3 +4,17 @@ dist/
 build/
 aminet/
 Disk.info
+private-test/
+stuff/
+patches/
+.vamosrc
+activate
+test/report.txt
+test/TestSuite.info
+src/report.txt
+src/BSDSocket_Labels.s
+src/BSDSocket_Size.s
+src/bsdsocket_lib.fd
+src/bsdsocket_lvo.i
+src/*.Lib
+libs/

API.md

@@ -3,7 +3,9 @@
 Most functions will return -2 if the bsdsocket.library is
 not open.
 
-### Setup
+---
+
+## Setup
 
 #### ADDR=Socket Library Open
 
@@ -16,11 +18,15 @@ Try to open bsdsocket.library version 4.
   * If needed, you'll be able to directly access library functions
     using this address.
 
+---
+
 #### Socket Library Close
 
 Close bsdsocket.library. This is safe to call if the library
 is not open
 
+---
+
 #### RESULT=Socket Set Nonblocking(Socket, IsNonblocking BOOL)
 
 Make a socket blocking (False, default), or nonblocking (True).
@@ -29,6 +35,8 @@ Make a socket blocking (False, default), or nonblocking (True).
 
 * Result of IoctlSocket call.
 
+---
+
 #### RESULT=Socket Reuse Addr(Socket)
 
 Make a listening socket reuse the address it's trying to bind to.
@@ -38,9 +46,9 @@ You probably want to call this right before Socket Listen.
 
 * Result of setsockopt call.
 
+---
 
-
+## Connections
-### Connections
 
 #### SOCKET=Socket Create Inet Socket
 
@@ -51,10 +59,23 @@ Create a new Internet socket for reading or writing.
 * Socket number on success
 * -1 on failure
 
+---
+
 #### RESULT=Socket Connect(Socket to IPAddress$, Port)
 
-Attempt to connect to a remote host. Currently doesn't
+Attempt to connect to a remote IP address.
-support DNS lookups.
+
+##### Emulation vs. Physical/FPGA Amiga note
+
+On emulated Amigas (FS-UAE) with emulated `bsdsocket.library`, a failure in
+`Socket Connect` due to giving the function a bad IP address allows you to reuse
+the socket. On real or FPGA-based Amiga running real TCP/IP stacks (MiamiDX,
+Roadshow), the socket will be made unusable and you'll need to
+`Socket Close Socket` and reopen the socket with whatever parameters necessary.
+Closing and opening `bsdsocket.library` has the same effect.
+
+Always close and re-open a socket if you have any `Socket Connect` failure and
+any non-blocking polling loops time out!
 
 ##### Returns
 
@@ -64,19 +85,24 @@ support DNS lookups.
     the socket with Socket Select and Socket Getsockopt Int
     to see if the connection succeeded
 * -11 port out of range
+* -13 IP address has zero length
+
+---
 
 #### RESULT=Socket Reuse Addr(Socket)
 
 Set a server socket to reuse an interface and port that had
 been used recently. You likely want this if you're building
 something that listens on a port for connections. This calls
-setsockopt() for you.
+`setsockopt()` for you.
 
 ##### Returns
 
 The result of calling setsockopt() while setting your socket
 to reuse addresses.
 
+---
+
 #### RESULT=Socket Bind(Socket to IPAddress, Port)
 
 Attempt to bind a socket to a network interface. Use
@@ -89,6 +115,8 @@ interfaces.
 * -1 on other error
 * -11 port out of range
 
+---
+
 #### RESULT=Socket Listen(Socket)
 
 Start listening for connections.
@@ -98,6 +126,8 @@ Start listening for connections.
 * 0 on success
 * -1 on failure
 
+---
+
 #### NEW_SOCKET=Socket Accept(Socket)
 
 Get the socket that connected to this one. Wait for a connect
@@ -115,11 +145,13 @@ socket non-blocking and use Fdsets and Select!
 * The remote socket number on success
 * -1 on failure
 
-#### RESULT=Socket Async Wait Reading(Socket, Wait_ms)
+---
+
+#### RESULT=Socket Wait Async Reading(Socket, Wait_ms)
 
 Wait the given number of milliseconds for the nonblocking socket to be ready for reading.
-Use this when you're waiting for a client to connect to you, or if you're waiting for
+Use on a listen socket to await new connections, or on a connected socket to await
-a remote socket to send you data.
+incoming data packets.
 
 ##### Returns
 
@@ -127,7 +159,9 @@ a remote socket to send you data.
 * -1 on error. Use `Socket Errno` for more detail.
 * 1 on success.
 
-#### RESULT=Socket Async Wait Writing(Socket, Wait_ms)
+---
+
+#### RESULT=Socket Wait Async Writing(Socket, Wait_ms)
 
 Wait the given number of milliseconds for the nonblocking socket to be ready for writing.
 Use this when you're connecting to a remote server and want to know if the connection
@@ -143,6 +177,8 @@ has been completed.
     checks will return 1.
 * 1 on success.
 
+---
+
 #### RESULT=Socket Set Timeout(Socket, Wait_ms)
 
 Set a socket to timeout after Wait_ms milliseconds if reading or writing doesn't complete.
@@ -152,18 +188,21 @@ Set a socket to timeout after Wait_ms milliseconds if reading or writing doesn't
 * 0 on success
 * -1 on error
 
-#### RESULT=Socket Close(Socket)
+---
+
+#### RESULT=Socket Close Socket(Socket)
 
 Close a socket.
 
+
 ##### Returns
 
 * 0 on success
 * -1 on error
 
+---
 
-
+## Data Transfers
-### Data Transfers
 
 #### SENT=Socket Send$(Socket, String$)
 
@@ -194,6 +233,8 @@ End Proc
 * Number of characters sent
 * -1 on other error
 
+---
+
 #### SENT=Socket Send(Socket, Data Pointer, Length)
 
 Send a block of data to a connected socket.
@@ -203,6 +244,8 @@ Send a block of data to a connected socket.
 * Number of characters sent
 * -1 on other error
 
+---
+
 #### DATA$=Socket Recv$(Socket, MaxLength)
 
 Retrieve at most MaxLength bytes from Socket, and put them into a string.
@@ -212,7 +255,9 @@ If Len(DATA$) < MaxLength, you've read the last bit of data from the socket.
 
 * String of data, which is blank if there is no more data.
 
-### LENGTH=Socket Recv(Socket to Dataptr, MaxLength)
+---
+
+#### LENGTH=Socket Recv(Socket to Dataptr, MaxLength)
 
 Retrieve at most MaxLength bytes from Socket, and put them into the memory
 address at Dataptr.
@@ -222,9 +267,9 @@ address at Dataptr.
 * Count of bytes read
 * -1 on error
 
+---
 
-
+## Informational
-### Informational
 
 #### HOST=Socket Get Host(Socket)
 
@@ -234,6 +279,8 @@ Get the IPv4 (Long) host value the given socket is using.
 
 * Host as a long value
 
+---
+
 #### PORT=Socket Get Port(Socket)
 
 Get the 16-bit port (Word) value the given socket is using.
@@ -242,6 +289,8 @@ Get the 16-bit port (Word) value the given socket is using.
 
 * Port as a word value
 
+---
+
 #### RESULT$=Socket Inet Ntoa$(Host)
 
 Turn a long Host address into a string.
@@ -250,6 +299,8 @@ Turn a long Host address into a string.
 
 * IP address as string
 
+---
+
 #### RESULT=Socket Errno
 
 Get the error from the last command. Note that this is
@@ -260,6 +311,18 @@ not cleared on a successful command!
 Error number from last call. Look in <sys/error.h> for more
 details.
 
+---
+
+#### RESULT=Socket Herrno
+
+Get the error from the last DNS resolver command.
+
+##### Returns
+
+Resolver error number (`h_errno`) from last call.
+
+---
+
 #### RESULT$=Dns Get Address By Name$(Domain Name$)
 
 Look up the first IP address associated with this hostname.
@@ -274,32 +337,8 @@ out. There's no way to set this timeout, or cancel or override it via AMOS.
 
 String with IP address, or blank string on error.
 
-#### RESULT=Socket Status(Socket)
 
-Returns basic connection information about a socket.
+## Low Level
-
-##### Warning
-
-Since none of the socket processing of this extension happens in the
-background, you're likely better off using other means to detect
-socket status.
-
-* Disconnected: Try a recv and get zero bytes back. Check Socket Errno.
-* Broken: Try a send. If it fails, check Socket Errno.
-* Ready: Use the Async Wait functions.
-
-##### Returns
-
-Status of socket:
-
-* 0 = Closed
-* 2 = Listening
-* 6 = Connecting
-* 7 = Connected
-
-
-
-### Low Level
 
 #### RESULT=Socket Setsockopt Int(Socket, Option, Value)
 
@@ -311,6 +350,8 @@ Socket Reuse Addr().
 
 * Result of setsockopt call
 
+---
+
 #### RESULT=Socket Getsockopt Int(Socket, Option)
 
 Get a socket option. You probably want SO_ERROR,
@@ -321,6 +362,8 @@ attempt a connection with a non-blocking socket.
 
 * Result of getsockopt call
 
+---
+
 #### ADDR=Socket Fdset Zero(fd_set)
 
 Clear out the specified fd_set.
@@ -330,6 +373,8 @@ Clear out the specified fd_set.
 * Address to that particular fd_set
 * -1 if fd_set out of range. You get 16 of them.
 
+---
+
 #### ADDR=Socket Fdset Set(fd_set, Socket to Value BOOL)
 
 Set or clear a socket bit in an fd_set.

README.md

@@ -127,6 +127,10 @@ Socket Library Close
 * [AQUABYSS](https://agedcode.com/agedcode/en/games/aquabyss)
   * As of April 2023, the extension's been in heavy use for over a month
     on the client side of the game.
+* [Hop to the Top: Bunny's Revenge](https://rabbit.robsmithdev.co.uk/)
+  * The game uses this extension to send and receive high score information.
+    I also did some of the art for the game!
+* [Gopherized](https://allanon71.itch.io/gopherized)
 
 Doing something cool with the extension?
 [Contact me](https://theindustriousrabbit.com/about) and I'll add it to the list!
@@ -149,6 +153,16 @@ Doing something cool with the extension?
   timeouts using `Socket Async Wait Writing` to determine if the Internet
   is available.
 
+## Slot 18 taken already?
+
+I'm also building releases for slots 9, 11, and 17. They're available for
+separate download from each Release version 1.1.4 and on.
+
+Note that you won't be able to load the test AMOS programs, or any other
+progaam using the Slot 18 version, because AMOS uses the extension's slot
+number in the saved tile. You'll have to export and import ASCII versions
+of programs.
+
 ## Versioning
 
 This project uses semantic versioning.
@@ -158,17 +172,19 @@ This project uses semantic versioning.
 
 ## License
 
-Copyright 2023 John Bintz. Licensed under the MIT License.
+Copyright 2023-2024 John Bintz. Licensed under the MIT License.
 
 If you use this in your project, and you really want to,
 throw a link to theindustriousrabbit.com somewhere! You can
 also find a donate link on
 [the About section on The Industrious Rabbit](https://theindustriousrabbit.com/about).
 
-## Feedback? Bug reports?
+## Feedback? Bug reports? Patches?
 
-Go to the [About section on The Industrious Rabbit](https://theindustriousrabbit.com/about)
+First, run `test/TestSuite` to generate a `report.txt` file.
-to contact me.
+
+Then, go to the [About section on The Industrious Rabbit](https://theindustriousrabbit.com/about)
+to contact me, send the `report.txt` along with the details on your issue.
 
 ## Changelog
 
@@ -181,14 +197,92 @@ to contact me.
 * Fix bug in Socket Wait Async Writing where result of getsockopt was
   incorrectly used.
 
+### 1.1.0 (2024-02-23)
+
+* Fix bug in `Dns Get Host Address By Name$` where it assumed AMOS strings are
+  null-terminated. They are not.
+* Add `Socket Herrno` to aid in debugging resolver errors.
+
+### 1.1.1 (2024-03-17)
+
+* Fix bug in `Socket Inet Ntoa$` where the null terminator on the result of
+  calling `Inet_NtoA` was being included in the AMOS string.
+* Fix crash bug in `Socket Inet Ntoa$` if called with the BSD Socket library
+  was not open.
+
+### 1.1.2 (2024-03-18)
+
+* Fix all functions that return strings so that strings work properly
+  in AMOS. While you could kind of use the immediate return value of the
+  string, any future manipulation of that string would fail. This fixes
+  the following functions:
+  * `Socket Inet Ntoa$`
+  * `Dns Get Address By Name$`
+  * `Socket Recv$`
+
+### 1.1.3
+
+Internal release.
+
+### 1.1.4 (2024-05-02)
+
+* Fix bug in fdset macro where using D3 for a parameter could cause corruption.
+* Copy a null-terminated copy of IP address for `SocketIPAddressPortToSockaddr`.
+* Add test suite to exercise extension functionality.
+* Fix several crash bugs found due to the test suite.
+* Retructure API docs for easier reading.
+* Improve build and release tooling.
+
 ## Development
 
 ### Environment
 
+#### Native Amiga
+
 * Clone the [AMOS Professional source code](https://github.com/AOZ-Studio/AMOS-Professional-Official)
-* Run `execute absdsocket`
+  * Copy `AMOSPro Sources/+lequ.s` to `+LEqu.s`
-  * Note that you'll have to fix up some assigns and files in the AMOS Professional
+* Generate the socket LVO file in the `src` directory
-    source directory. I'll update this README with those changes once I track them down...
+  * Install [`fd2pragma`](https://aminet.net/package/dev/misc/fd2pragma) in your path
+  * Download `https://raw.githubusercontent.com/cnvogelg/amitools/master/amitools/data/fd/bsdsocket_lib.fd` to `src`
+  * In a Shell:
+
+    ```
+    cd src
+    fd2pragma bsdsocket_lib.fd to "" special 20
+    ```
+
+* Fix up `src/absdsocket` to match your system's setup
+* In a Shell:
+
+```
+cd src
+execute absdsocket
+```
+
+#### Emulated setup (WinUAE, FS-UAE, Amiberry)
+
+Run `bin/setup` to do most of the setups above.
+
+### Debugging
+
+#### Cross-platform
+
+Modify data in the `DebugArea` and read it by `Peek`/`Deek`/`Leek`ing from
+the base address provided by `Socket Get Debug Area`.
+
+#### WinUAE/FS-UAE
+
+In the debugger, set a memory breakpoint at `$100` for two written bytes:
+
+```
+w 0 100 2
+```
+
+Then, in your code, clear those two bytes to stop execution at that point:
+
+```asm
+  CLR.W $100
+```
 
 ### Releasing
 

bin/rebuild_raw_source

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-for i in examples/*.amos; do
+for i in examples/*.amos test/*.amos; do
   echo "$i"
-  ~/Projects/amostools/listamos -e AMOSPro_BSDSocket.Lib "${i}" > "${i%.amos}.basic" 2>/dev/null
+  ~/Projects/amostools/listamos -e src/AMOSPro_BSDSocket.Lib "${i}" > "${i%.amos}.basic" 2>/dev/null
 done

bin/release

@@ -6,7 +6,7 @@ require 'erb'
 
 source = File.read('src/BSDSocket.s')
 
-aminet_template = ERB.new(File.read("aminet.readme.erb"))
+aminet_template = ERB.new(File.read('aminet.readme.erb'))
 
 capture_version = false
 version = nil
@@ -24,6 +24,22 @@ source.lines.each do |line|
   end
 end
 
+FileUtils.cp 'src/AMOSPro_BSDSocket.Lib', 'AMOSPro_BSDSocket.Lib'
+
+strings = []
+Open3.popen2e('strings', 'AMOSPro_BSDSocket.Lib') do |stdin, stdout_and_stderr, wait_thr|
+  stdin.close
+
+  stdout_and_stderr.each { |l| strings << l }
+
+  wait_thr.join
+end
+
+unless strings.any? { |s| s[version] }
+  puts "Extension build doesn't match source version! Did you rebuild it yet on the Amiga?"
+  exit 1
+end
+
 FileUtils.mkdir_p 'dist'
 
 build_base = 'build'
@@ -31,40 +47,48 @@ project_name = 'BSDSocket-Extension'
 
 build_dir = File.join(build_base, project_name)
 FileUtils.rm_rf build_dir
+FileUtils.rm_rf 'aminet'
 FileUtils.mkdir_p build_dir
 FileUtils.mkdir_p 'aminet'
 
 hackerbun_target = File.expand_path("dist/AMOSPro_BSDSocket_#{version}.lha")
 
 [
-  "AMOSPro_BSDSocket.Lib",
+  'AMOSPro_BSDSocket.Lib',
-  "README.md",
+  'README.md',
-  "API.md",
+  'API.md',
-  "LICENSE",
+  'LICENSE'
 ].each do |file|
   target = "#{build_dir}/#{file}"
   FileUtils.mkdir_p File.dirname(target)
   FileUtils.cp file, target
 end
 
-[
+gitignores = File.readlines('.gitignore').map(&:strip)
-  "src",
+
-  "examples"
+%w[
+  src
+  examples
 ].each do |dir|
   FileUtils.cp_r dir, "#{build_dir}/#{dir}"
+
+  Dir["#{build_dir}/#{dir}/**/*"].each do |file|
+    FileUtils.rm file if gitignores.any? { |gi| File.fnmatch(gi, file) }
+    FileUtils.rm file if [/\.fd$/, /\.i$/].any? { |p| file[p] }
+  end
 end
 
-Dir["icons/**/*.info"].each do |info|
+Dir['icons/**/*.info'].each do |info|
-  target = info.gsub("icons/", build_base + "/")
+  target = info.gsub('icons/', build_base + '/')
   FileUtils.mkdir_p File.dirname(target)
   FileUtils.cp info, target
 end
 
 Dir.chdir build_base do
   Open3.popen2e(
-    "jlha", "c", hackerbun_target,
+    'jlha', 'c', hackerbun_target,
-    *(Dir["*"])) do |stdin, stdout_and_stderr, wait_thr|
+    *(Dir['*'])
-
+  ) do |stdin, stdout_and_stderr, wait_thr|
     Thread.new do
       stdout_and_stderr.each { |l| puts l }
     end
@@ -75,7 +99,7 @@ Dir.chdir build_base do
   end
 end
 
-FileUtils.cp hackerbun_target, "aminet/BSDSocket-Extension.lha"
+FileUtils.cp hackerbun_target, 'aminet/BSDSocket-Extension.lha'
-File.open("aminet/BSDSocket-Extension.readme", "w") do |fh|
+File.open('aminet/BSDSocket-Extension.readme', 'w') do |fh|
   fh.puts aminet_template.result(binding)
 end

bin/setup

@@ -0,0 +1,24 @@
+#!/bin/bash
+
+mkdir -p stuff
+if [ ! -d stuff/AMOS-Professional-Official ]; then
+  cd stuff
+  git clone https://code.hackerbun.dev/TheIndustriousRabbit/amos-professional.git
+  cd ..
+fi
+
+if [ ! -f src/bsdsocket_lib.fd ]; then
+  cd src
+  wget https://raw.githubusercontent.com/cnvogelg/amitools/master/amitools/data/fd/bsdsocket_lib.fd
+  cd ..
+fi
+
+echo "On the emulated Amiga, mount this folder at amos-pro-bsdsocket-extension: and run"
+echo
+echo "cd amos-pro-bsdsocket-extension:"
+echo "cd src"
+echo 'fd2pragma bsdsocket_lib.fd to "" special 20'
+echo
+echo "Then, to build the software, run:"
+echo
+echo "execute absdsocket"

src/BSDSocket.s

@@ -1,13 +1,14 @@
 ; BSDSocket Extension for AMOS Professional
-; Copyright 2023 John Bintz
+; Copyright 2023-2024 John Bintz
 ; Licensed under the MIT License
 ;
 ; Writing this code the right way, 25 years later.
 
 ; extension number 18
-ExtNb           equ 18-1
+; this now comes from GenAm command line option
+;ExtNb           equ 18-1
 Version         MACRO
-                dc.b "1.0.1-20230403"
+                dc.b "1.1.4-20240502"
                 ENDM
 VerNumber       equ $1
 
@@ -15,12 +16,12 @@ VerNumber       equ $1
 ;       Include the files automatically calculated by
 ;       Library_Digest.AMOS
 ;---------------------------------------------------------------------
-        Incdir "Stuff:development/amos-professional-official-mas/"
+        Incdir "AMOSPro_Sources:"
-        Incdir "Stuff:development/amos-professional-official-mas/includes/"
+        Incdir "AMOSPro_Sources:includes/"
         Include "BSDSocket_Size.s"
         Include "BSDSocket_Labels.s"
         Include "+AMOS_Includes.s"
-        Include "socket_lvo.i"
+        Include "bsdsocket_lvo.i"
 
 ; get the effective address of something in extension memory
 Dlea    MACRO
@@ -56,7 +57,6 @@ SO_REUSEADDR EQU $4
 MAX_SOCKETS EQU 64
 
 len_sockaddr_in        EQU 16
-sockaddr_in_sin_len    EQU 0
 sockaddr_in_sin_family EQU 1
 sockaddr_in_sin_port   EQU 2
 sockaddr_in_sin_addr   EQU 4
@@ -68,6 +68,20 @@ Error_PortOutOfRange         EQU -11
 Error_FdsetOutOfRange        EQU -11
 Error_UnableToBind           EQU -12
 
+; socket herrno and tag lists
+; built from:
+; * https://wiki.amigaos.net/amiga/autodocs/bsdsocket.doc.txt
+; * https://github.com/deplinenoise/amiga-sdk/blob/master/netinclude/amitcp/socketbasetags.h
+; * http://amigadev.elowar.com/read/ADCD_2.1/Includes_and_Autodocs_2._guide/node012E.html
+
+TAG_USER EQU (1<<31)
+SBTF_REF EQU $8000
+SBTB_CODE EQU 1
+SBTS_CODE EQU $3FFF
+SBTC_HERRNO EQU 6
+
+HerrnoTag EQU (TAG_USER|SBTF_REF|((SBTC_HERRNO&SBTS_CODE)<<SBTB_CODE))
+
 ; wrap code that doesn't take arguments with these
 PreserveStackInstruction MACRO
   MOVEM.L A2-A6/D6-D7,-(SP)
@@ -128,19 +142,20 @@ LeaFdset MACRO
 ; LeaFdsetForBit fd_set reg,target address,target bit in address
 LeaFdsetForBit MACRO
   LeaFdset \1,\2 ; get fdset base address in \2
-  MOVE.L D3,-(SP)
+  MOVEM.L D3-D4,-(SP)
     MOVE.L \3,D3 ; Put target bit into D3
     ROR.L #5,D3  ; lop off the first 5 bits
     AND.L #$7,D3 ; only keep the top three
     ROL.L #2,D3  ; multiply by 4
     ADD.L D3,\2  ; add that value to the fdset address
 
-    AND.L #$1F,\3 ; only keep 0-31 in \3
+    MOVE.L \3,D4
+    AND.L #$1F,D4 ; only keep 0-31 in \3
 
     MOVEQ #1,D3
-    ROL.L \3,D3   ; shift that bit left as many as target
+    ROL.L D4,D3   ; shift that bit left as many as target
     MOVE.L D3,\3  ; put that in the target
-  MOVE.L (SP)+,D3
+  MOVEM.L (SP)+,D3-D4
 
   ENDM
 
@@ -330,6 +345,9 @@ C_Tk    dc.w    1,0
         AddTokenFunction SocketCloseSocket
         dc.b    "socket close socke","t"+$80,"00",-1
 
+        AddTokenFunction SocketHerrno
+        dc.b    "socket herrn","o"+$80,"0",-1
+
 ;       TOKEN_END
         dc.w    0
         dc.l    0          ; Important!
@@ -386,6 +404,8 @@ getsockopt_len      ds.l 1
 MaxSocketSeen       dc.w 0
 
 sockaddr_ram        ds.l 1
+
+; also used for errno tags
 AcceptScratchArea   ds.b 16
 SelectScratchArea   ds.l 2
 
@@ -493,7 +513,7 @@ _SocketLibraryOpen_Finish:
 ;
 ; Turn an IP address and port into a sockaddr_in strucure
 ;
-; d0 - 0 on success, -1 on failure
+; d0 - address of sockaddr_in on success, -1 on failure
 ; - - - - - - - -
     Lib_Def SocketIPAddressPortToSockaddr
 
@@ -514,14 +534,26 @@ _ToSockaddr_PortOK:
       MOVE.L sockaddr_ram-MB(A3),A0
       ADD.L D3,A0 ; A0 contains our offset in ram
 
-      MOVE.B #len_sockaddr_in,sockaddr_in_sin_len(A0)
-      MOVE.B #AF_INET,sockaddr_in_sin_family(A0)
-      MOVE.W D2,sockaddr_in_sin_port(A0)
-
       MOVEM.L A0-A3/D3,-(SP)
+        MOVE.L D1,A1    ; ip string address
+        MOVE.W (A1)+,D3 ; string length
 
-        MOVE.L D1,A0 ; ip address
+        BNE _ToSockaddr_StringHasLength
-        ADDQ #2,A0   ; string data starts 2 bytes in
+      MOVEM.L (SP)+,A0-A3/D3
+    MOVEM.L (SP)+,A0/A3/D3
+
+    MOVE.L #-14,D0
+    RTS
+
+_ToSockaddr_StringHasLength:
+
+        ; temporarily store a null-terminated copy of the ip string in A0
+        MOVE.L A0,A2
+        SUBQ #1,D3      ; DBRA loop runs D3 + 1 times
+_ToSockaddr_CopyIPString:
+        MOVE.B (A1)+,(A2)+
+        DBRA D3,_ToSockaddr_CopyIPString
+        MOVE.B #0,(A2)  ; end of string
 
         ; if the string contains "INADDR_ANY", we use that value instead
         MOVE.L A0,A1
@@ -546,7 +578,15 @@ _ToSockaddr_ParseIPAddress:
 
 _ToSockaddr_DoneParsing:
       MOVEM.L (SP)+,A0-A3/D3
-      MOVE.L D0,sockaddr_in_sin_addr(A0)
+
+      ; create struct sockaddr_in
+      MOVE.B #len_sockaddr_in,(A0)
+      MOVE.B #AF_INET,sockaddr_in_sin_family(A0)
+      MOVE.W D2,sockaddr_in_sin_port(A0)
+      LEA sockaddr_in_sin_addr(A0),A3
+      MOVE.L D0,(A3)+
+      CLR.L (A3)+
+      CLR.L (A3)+
 
       MOVE.L A0,D0
     MOVEM.L (SP)+,A0/A3/D3
@@ -626,7 +666,6 @@ _SocketCreateInetSocket_Done:
     Ret_Int
 
 _SocketConnect_LibraryOpen:
-
     MOVE.L D0,-(SP) ; socket id onto stack
 
       Rbsr L_SocketIPAddressPortToSockaddr
@@ -806,11 +845,11 @@ _SocketBind_SockaddrIn:
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
     Lib_Par SocketErrno
 ; - - - - - - - - - - - - -
-    PreserveStackInstruction
+    PreserveStackFunction
 
     EnsureBSDSocketLibrary _SocketErrno_LibraryOpen
 
-    RestoreStackInstruction
+    RestoreStackFunction
     Ret_Int
 
 _SocketErrno_LibraryOpen:
@@ -821,7 +860,7 @@ _SocketErrno_LibraryOpen:
 
     MOVE.L D0,D3
 
-    RestoreStackInstruction
+    RestoreStackFunction
     RTS
 
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
@@ -1292,6 +1331,12 @@ _SocketSelect_PerformSelect
 ; - - - - - - - - - - - - -
     PreserveStackFunction
 
+    EnsureBSDSocketLibrary _SocketGetHost_LibraryOpen
+
+    RestoreStackFunction
+    Ret_Int
+
+_SocketGetHost_LibraryOpen:
     MULU #len_sockaddr_in,D3
     Dload A0
     MOVE.L sockaddr_ram-MB(A0),A0
@@ -1312,6 +1357,13 @@ _SocketSelect_PerformSelect
 ; - - - - - - - - - - - - -
     PreserveStackFunction
 
+    EnsureBSDSocketLibrary _SocketGetPort_LibraryOpen
+
+    RestoreStackFunction
+    Ret_Int
+
+_SocketGetPort_LibraryOpen:
+
     MULU #len_sockaddr_in,D3
     Dload A0
     MOVE.L sockaddr_ram-MB(A0),A0
@@ -1334,8 +1386,10 @@ _SocketSelect_PerformSelect
     PreserveStackFunction
     EnsureBSDSocketLibrary _SocketInetNtoa_LibraryOpen
 
-    RestoreStackInstruction
+    MOVE.L ChVide(A5),D3
-    Ret_Int
+
+    RestoreStackFunction
+    Ret_String
 
 _SocketInetNtoa_LibraryOpen:
     MOVE.L D3,D0
@@ -1352,21 +1406,28 @@ _SocketInetNtoA_StringSizeLoop:
     TST.B (A0)+
     BNE _SocketInetNtoA_StringSizeLoop
 
-    MOVE.L A0,D3
+    MOVE.L A0,D4
-    SUB.L A2,D3 ; D3 = length
+    SUB.L A2,D4 ; D4 = length
+    SUBQ #1,D4 ; get rid of the null terminator
+
+    ; add 2 and even out the space
+    MOVE.L D4,D3
+    AND.W #$FFFE,D3
+    ADDQ.W #2,D3
+
     Rjsr L_Demande ; string base address is in A0/A1
 
-    MOVE.W D3,(A0)+ ; length of string
+    LEA 2(A0,D3.W),A1
-    SUBQ #1,D3
+
+    MOVE.L A1,HiChaine(A5)
+    MOVE.L A0,A1
+
+    MOVE.W D4,(A0)+ ; length of string
+    SUBQ #1,D4
 
 _SocketInetNtoA_StringCopyLoop:
-    MOVE.B (A2,D3),(A0,D3)
+    MOVE.B (A2,D4),(A0,D4)
-    DBRA D3,_SocketInetNtoA_StringCopyLoop
+    DBRA D4,_SocketInetNtoA_StringCopyLoop
-
-    ; make the address even
-    EvenOutStringAddress A0,D3
-
-    MOVE.L A0,HiChaine(A5) ; Does L_Demande nuke A5 too?
 
     MOVE.L A1,D3 ; string return
 
@@ -1431,7 +1492,7 @@ _SocketRecvString_NotTooLong:
 _SocketRecvString_BufferAllocated:
         MOVE.L D0,A0  ; buffer address
         MOVE.L D1,D0  ; socket
-      MOVE.L (SP)+,D1 ; length
+      MOVE.L (SP)+,D1 ; reserved ram buffer length
       MOVEQ #0,D2     ; flags
 
       MOVEM.L A0-A1/D1,-(SP)
@@ -1459,39 +1520,38 @@ _SocketRecvString_BufferAllocated:
     Ret_String
 
     ; TODO received data is wrong somewhere
-
 _SocketRecvString_DataReceived:
-      ; D0 contains receive length
+      ; D0 contains socket receive length
 
-      MOVE.L D1,-(SP)
+      ; TODO: handle zero return length
+
+      MOVE.L A0,A2 ; A2 contains read buffer
+
+      MOVE.L D1,-(SP) ; reserved ram buffer length
+        ; demande/hichaine string setup
         MOVEQ #0,D3
-        MOVE.W D0,D3 ; prep for L_Demande. can we request a zero length string?
+        MOVE.W D0,D3
-        MOVE.L A0,A2 ; L_Demande blows away A0 and A1, A2 now contains buffer
+        AND.W #$FFFE,D3
+        ADDQ #2,D3
         Rjsr L_Demande ; A0/A1 contain string address
 
-        MOVE.W D3,(A0)+ ; put in string length
+        LEA 2(A0,D3.W),A1
-        SUBQ #1,D3      ; reduce by one for DBRA
+        MOVE.L A1,HiChaine(A5)
+        MOVE.L A0,A1
+
+        MOVE.W D0,(A1)+ ; put in string length
+        SUBQ #1,D0      ; reduce by one for DBRA
         MOVE.L A2,A3    ; A3 now contains start of buffer
 
 _SocketRecvString_CopyData:
-        MOVE.B (A2,D3),(A0,D3)
+        MOVE.B (A2,D0),(A1,D0)
-        DBRA D3,_SocketRecvString_CopyData
+        DBRA D0,_SocketRecvString_CopyData
+      MOVE.L (SP)+,D0 ;  reserved ram buffer length
 
-        EvenOutStringAddress A0,D2
+      MOVE.L A0,-(SP)
-
-        ; add to string manager for garbage collection?
-        MOVE.L A0,HiChaine(A5)
-      MOVE.L (SP)+,D0
-
-      ; free ram
-      MOVE.L A1,-(SP) ; A1 contains our string addres
-
-        ;MOVE.L D1,D0
         MOVE.L A3,A1
         Rjsr L_RamFree
-
       MOVE.L (SP)+,D3 ; string return
-
     MOVE.L (SP)+,A3
 
     RestoreStackFunction
@@ -1613,7 +1673,7 @@ _SocketWaitAsyncWriting_LibraryOpen:
       Rbsr L_MicrosecondsToTimeval ; A3 contains timeval
 
       Dload A4
-      MOVE.L D0,-(SP)
+      MOVEM.L D0,-(SP)
         ; set up WaitSelect
         MOVEQ #0,D1
         LeaFdset D1,A1 ; write fdset
@@ -1635,7 +1695,7 @@ _SocketWaitAsyncWriting_LibraryOpen:
         TST.L D0
         BEQ _SocketWaitAsyncWriting_Timeout
         BMI _SocketWaitAsyncWriting_Error
-      MOVE.L (SP)+,D0 ; D0 contains socket again
+      MOVEM.L (SP)+,D0 ; D0 contains socket again
 
       Dload A4
       ; a socket became interesting, check the Fdset
@@ -1673,7 +1733,7 @@ _SocketWaitAsyncWriting_CheckSockopt:
       MOVE.L (SP)+,A3
 
       TST.L D0
-      BMI _SocketWaitAsyncWriting_Error
+      BMI _SocketWaitAsyncWriting_Error2
 
       Dlea IoctlSockOptScratch,A0
       MOVE.L (A0),D0
@@ -1695,6 +1755,7 @@ _SocketWaitAsyncWriting_Ready:
 
 _SocketWaitAsyncWriting_Error:
       MOVE.L (SP)+,D1
+_SocketWaitAsyncWriting_Error2:
     MOVEM.L (SP)+,A3-A4
 
     MOVE.L #-1,D3
@@ -1776,7 +1837,6 @@ _SocketWaitAsyncReading_LibraryOpen:
         BMI _SocketWaitAsyncReading_Done
       MOVE.L (SP)+,D0 ; D0 contains socket again
 
-      ;Dload A4
       ; a socket became interesting, check the Fdset
       MOVE.L D0,D3               ; socket in D3
       MOVEQ #0,D1                ; fdset in D1
@@ -1885,9 +1945,9 @@ _SocketReuseAddr_LibraryOpen:
 
 
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
-;   =Dns Get Host Address By Name$(Name String)
+;   =Dns Get Address By Name$(Name String)
 ;
-;   Get the status of a socket
+;   Convert a host name to an IP address
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
     Lib_Par DnsGetHostAddressByName
 
@@ -1900,15 +1960,43 @@ _SocketReuseAddr_LibraryOpen:
     Ret_String
 
 _DnsGetHostAddressByName_LibraryOpen:
-
     ; string so you need demande, hichaine, and chvide
     MOVE.L D3,A0 ; name
-    ADD.L #2,A0  ; skip length, string is null terminated (?)
+    MOVEQ #0,D0
+    MOVE.W (A0)+,D0 ; d0 contains length
+    MOVE.L D0,D1    ; d1 also has length
+    MOVE.L D0,D2    ; d2 also has length
+    Rjsr L_RamFast  ; d0 contains address
+    BNE _DnsGetHostAddressByName_StringRamAllocated
 
+    MOVE.L ChVide(A5),D3
+
+    RestoreStackFunction
+    Ret_String
+
+_DnsGetHostAddressByName_StringRamAllocated:
+    MOVE.L D0,A1 ; a1 contains address
+    SUBQ #1,D1   ; reduce by one for DBRA
+
+_DnsGetHostAddressByName_KeepCopyingAMOSString:
+    MOVE.B (A0)+,(A1)+ ; byte copy
+    DBRA D1,_DnsGetHostAddressByName_KeepCopyingAMOSString ; keep copying
+    MOVE.B #0,(A1)+ ; null terminate string
+    MOVE.L D0,A0 ; first param of gethostbyname
+
+    MOVEM.L A0/D2,-(SP)
       WithDataStorage
         LoadBSDSocketBase
         CALLLIB gethostbyname
       EndDataStorage
+    MOVEM.L (SP)+,A0/D2
+
+    ; free the ram before we go any farther
+    MOVE.L D0,-(SP)
+      MOVE.L A0,A1
+      MOVE.L D2,D0
+      Rjsr L_RamFree
+    MOVE.L (SP)+,D0
 
     TST.L D0
     BNE _DnsGetHostAddressByName_GetIPAddress
@@ -1919,7 +2007,6 @@ _DnsGetHostAddressByName_LibraryOpen:
     Ret_String
 
 _DnsGetHostAddressByName_GetIPAddress:
-
     MOVE.L D0,A0
     MOVE.L 16(A0),A1 ; **h_addr_list
     MOVE.L (A1),A1 ; *h_addr_list
@@ -1940,18 +2027,26 @@ _DnsGetHostAddressByName_GetIPAddressLength:
       BNE _DnsGetHostAddressByName_GetIPAddressLength
     MOVE.L (SP)+,A2
 
-    Rjsr L_Demande ; string is in A0/A1
-    MOVE.W D3,(A0)+
     SUBQ #1,D3
+    MOVE.L D3,D4
+
+    AND.W #$FFFE,D3
+    ADDQ #2,D3
+
+    Rjsr L_Demande ; string is in A0/A1
+    LEA 2(A0,D3.W),A1
+    MOVE.L A1,HiChaine(A5)
+    MOVE.L A0,A1
+
+    MOVE.W D4,(A1)+
+
+    SUBQ #1,D4
 
 _DnsGetHostAddressByName_KeepCopying:
-    MOVE.B (A2,D3),(A0,D3)
+    MOVE.B (A2)+,(A1)+
-    DBRA D3,_DnsGetHostAddressByName_KeepCopying
+    DBRA D4,_DnsGetHostAddressByName_KeepCopying
 
-    EvenOutStringAddress A0,D0
+    MOVE.L A0,D3
-
-    MOVE.L A0,HiChaine(A5)
-    MOVE.L A1,D3
 
     RestoreStackFunction
 
@@ -2053,6 +2148,51 @@ _SocketCloseSocket_LibraryOpen:
     RestoreStackFunction
     Ret_Int
 
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+;   Int=Socket Herrno
+;
+;   Return Herrno value, errors related to DNS resolution
+; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
+    Lib_Par SocketHerrno
+; - - - - - - - - - - - - -
+    PreserveStackFunction
+    EnsureBSDSocketLibrary _SocketHerrno_LibraryOpen
+
+    RestoreStackFunction
+    Ret_Int
+
+_SocketHerrno_LibraryOpen:
+    ; set up tag list memory and place for herrno to go
+    Dlea AcceptScratchArea,A0
+    MOVE.L A0,A2
+    Dlea SelectScratchArea,A1
+
+    ; build the tag list
+    MOVE.L HerrnoTag,(A0)+
+    MOVE.L A1,(A0)+
+    MOVE.L 0,(A0)+
+    MOVE.L 0,(A0)+
+    MOVE.L A2,A0
+
+    WithDataStorage
+      LoadBSDSocketBase
+      CALLLIB SocketBaseTagList
+    EndDataStorage
+
+    TST.L D0
+    BEQ _SocketHerrno_success
+
+    ; failed
+    MOVE.L #-1,D3
+
+    RestoreStackFunction
+    Ret_Int
+
+_SocketHerrno_success:
+    MOVE.L (A1),D3
+
+    RestoreStackFunction
+    Ret_Int
 ;
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 ;   Even if you do not have error messages, you MUST

src/absdsocket

@@ -1,10 +1,20 @@
 echo "***Assembling AMOSPro_BSDSocket.Lib"
-assign AMOSPro_System: MiSTerHD:Development/AMOSPro/AMOS_Pro
+assign AMOSPro_System: SYS:Development/AMOS_Pro
-Stuff:Development/AMOS-Professional-Official-mas/c/Library_Digest BSDSocket.s
+assign AMOSPro_Sources: amos-pro-bsdsocket-extension:stuff/AMOS-Professional-Official
-Stuff:Development/AMOS-Professional-Official-mas/c/Genam FROM BSDSocket.s TO AMOSPro_BSDSocket.Lib
+AMOSPro_Sources:c/Library_Digest BSDSocket.s
+AMOSPro_Sources:c/Genam FROM BSDSocket.s TO AMOSPro_BSDSocket.Lib -e ExtNb=18-1
 ;delete >NIL: BSDSocket_Labels.s
 ;delete >NIL: BSDSocket_Size.s
+FAILAT 21
 copy AMOSPro_System:APSystem/AMOSPro_BSDSocket.lib AMOSPro_System:APSystem/AMOSPro_BSDSocket.lib.bak
+FAILAT 10
 copy AMOSPro_BSDSocket.Lib AMOSPro_System:APSystem/
-;use an amos file here that includes the plugin to quickly build a test program
+apcmp "/test/TestSuite.amos" inclib
-;apcmp "aqua_test_plugin.amos" inclib
+
+echo "Build for slot 9"
+AMOSPro_Sources:c/Genam FROM BSDSocket.s TO AMOSPro_BSDSocket_Slot9.Lib -e ExtNb=9-1
+echo "Build for slot 11"
+AMOSPro_Sources:c/Genam FROM BSDSocket.s TO AMOSPro_BSDSocket_Slot11.Lib -e ExtNb=11-1
+echo "Build for slot 17"
+AMOSPro_Sources:c/Genam FROM BSDSocket.s TO AMOSPro_BSDSocket_Slot17.Lib -e ExtNb=17-1
+

test/TestSuite.basic

@@ -0,0 +1,354 @@
+' BSD Socket Extension Test Suite
+'
+' Exercise all known functionality of the extension and write
+' a report file detailing the result.
+
+Screen Open 0,640,200,4,Hires
+
+_FILE_HANDLE=1
+Dim _CONTEXT$(10)
+_CONTEXT_INDEX=0
+
+Global _FILE_HANDLE,_CONTEXT$(),_CONTEXT_INDEX
+
+Procedure _ADD_TO_REPORT[MESSAGE$]
+   _CONTEXT_STRING$=""
+   For I=0 To _CONTEXT_INDEX-1
+      _CONTEXT_STRING$=_CONTEXT_STRING$+_CONTEXT$(I)
+      If I<>(_CONTEXT_INDEX-1)
+         _CONTEXT_STRING$=_CONTEXT_STRING$+"/"
+      End If 
+   Next I
+   _OUTPUT$="["+_CONTEXT_STRING$+"] "+MESSAGE$
+   Print #_FILE_HANDLE,_OUTPUT$
+   Print _OUTPUT$
+   ' ensure line is printed on screen to catch crashes
+   Wait Vbl 
+End Proc
+
+Procedure _BEGIN_CONTEXT[NAME$]
+   _CONTEXT$(_CONTEXT_INDEX)=NAME$
+   _CONTEXT_INDEX=_CONTEXT_INDEX+1
+End Proc
+
+Procedure _END_CONTEXT
+   _CONTEXT_INDEX=_CONTEXT_INDEX-1
+End Proc
+
+Open Out _FILE_HANDLE,"report.txt"
+
+_BEGIN_CONTEXT["Socket Library Open"]
+_BEGIN_CONTEXT["Open Library"]
+
+_LIBRARY_ADDRESS=Socket Library Open
+_ADD_TO_REPORT[Str$(_LIBRARY_ADDRESS)]
+
+_END_CONTEXT
+
+If _LIBRARY_ADDRESS=0
+   _ADD_TO_REPORT["bsdsocket.library not available, ending tests"]
+   _END_CONTEXT
+   Goto _FINISH_SUITE
+End If 
+
+_BEGIN_CONTEXT["Double open"]
+_NEW_LIBRARY_ADDRESS=Socket Library Open
+_ADD_TO_REPORT[Str$(_NEW_LIBRARY_ADDRESS)]
+_END_CONTEXT
+
+_END_CONTEXT
+
+
+_BEGIN_CONTEXT["Socket Create Inet Socket"]
+SOCKET=Socket Create Inet Socket
+_ADD_TO_REPORT[Str$(SOCKET)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Reuse Addr"]
+RESULT=Socket Reuse Addr(SOCKET)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Set Nonblocking"]
+_BEGIN_CONTEXT["False"]
+RESULT=Socket Set Nonblocking(SOCKET,False)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["True"]
+RESULT=Socket Set Nonblocking(SOCKET,True)
+_ADD_TO_REPORT[Str$(RESULT)]
+_ADD_TO_REPORT["Preserving this state for rest of tests"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Dns Get Address By Name$"]
+
+_BEGIN_CONTEXT["Bad domain name"]
+IP$=Dns Get Address By Name$("u8dsf93jsdfoiodsoi.sdfjdsoifueru.sadfasdsdasd")
+Print IP$
+_ADD_TO_REPORT[IP$]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["localhost"]
+IP$=Dns Get Address By Name$("localhost")
+_ADD_TO_REPORT[IP$]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["aminet.net"]
+IP$=Dns Get Address By Name$("aminet.net")
+Print IP$
+_ADD_TO_REPORT[IP$]
+_ADD_TO_REPORT["Using this IP address for connection tests"]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Returned string can be manipulated"]
+_ADD_TO_REPORT["Cat"+IP$+"Dog"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Connect"]
+_BEGIN_CONTEXT["port too high"]
+RESULT=Socket Connect(SOCKET To IP$,999999)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["blank ip"]
+RESULT=Socket Connect(SOCKET To "",80)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["invalid ip -- requires reopening failed socket"]
+RESULT=Socket Connect(SOCKET To "999.999.999.999",80)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Close Socket"]
+RESULT=Socket Close Socket(SOCKET)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+' re-set up this socket after a failed connection
+SOCKET=Socket Create Inet Socket
+_=Socket Set Nonblocking(SOCKET,True)
+
+_BEGIN_CONTEXT["aminet IP ("+IP$+") from above"]
+RESULT=Socket Connect(SOCKET To IP$,80)
+_ADD_TO_REPORT[Str$(RESULT)+" (ok to be -1, will Wait Async Writing next)"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Wait Async Writing"]
+
+_BEGIN_CONTEXT["With unconnected socket"]
+OTHER_SOCKET=Socket Create Inet Socket
+_=Socket Set Nonblocking(OTHER_SOCKET,True)
+
+_BEGIN_CONTEXT["2 second timeout"]
+RESULT=Socket Wait Async Writing(OTHER_SOCKET,2000)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Zero timeout"]
+RESULT=Socket Wait Async Writing(OTHER_SOCKET,0)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Connected socket"]
+_BEGIN_CONTEXT["Two second timeout"]
+RESULT=Socket Wait Async Writing(SOCKET,2000)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Zero timeout"]
+RESULT=Socket Wait Async Writing(SOCKET,0)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Attempt to get actual connection"]
+For TRIES=0 To 10
+  RESULT=Socket Wait Async Writing(SOCKET,500)
+  _ADD_TO_REPORT[Str$(RESULT)]
+  If RESULT>0
+    Exit 
+  End If 
+Next TRIES
+_END_CONTEXT
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Get Host"]
+_BEGIN_CONTEXT["socket id too high"]
+RESULT=Socket Get Host(999999)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["socket id is valid"]
+RESULT=Socket Get Host(SOCKET)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Get Port"]
+_BEGIN_CONTEXT["socket id too high"]
+RESULT=Socket Get Port(999999)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["socket id is valid"]
+RESULT=Socket Get Port(SOCKET)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Inet Ntoa$"]
+_BEGIN_CONTEXT["Use the socket host"]
+RESULT$=Socket Inet Ntoa$(Socket Get Host(SOCKET))
+_ADD_TO_REPORT[RESULT$]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["String can be manipulated"]
+_ADD_TO_REPORT["Cat"+RESULT$+"Dog"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Send and Socket Send$"]
+HTTP_REQUEST_HEADERS$="GET / HTTP/1.0"+Chr$(10)+"Host: amiga"+Chr$(10)+Chr$(10)
+
+_BEGIN_CONTEXT["Socket send$ first half"]
+FIRST_HALF$=Left$(HTTP_REQUEST_HEADERS$,10)
+RESULT=Socket Send$(SOCKET,FIRST_HALF$)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket send second half"]
+SECOND_HALF_START=Varptr(HTTP_REQUEST_HEADERS$)+10
+SECOND_HALF_LENGTH=Len(HTTP_REQUEST_HEADERS$)-10
+RESULT=Socket Send(SOCKET,SECOND_HALF_START,SECOND_HALF_LENGTH)
+_ADD_TO_REPORT[Str$(RESULT)]
+
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket wait Async Reading"]
+_BEGIN_CONTEXT["With unconnected socket"]
+_BEGIN_CONTEXT["2 second timeout"]
+RESULT=Socket Wait Async Reading(OTHER_SOCKET,2000)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_BEGIN_CONTEXT["Zero timeout"]
+RESULT=Socket Wait Async Reading(OTHER_SOCKET,0)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["With aminet socket"]
+_BEGIN_CONTEXT["2 second timeout"]
+RESULT=Socket Wait Async Reading(SOCKET,2000)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Zero timeout"]
+RESULT=Socket Wait Async Reading(SOCKET,0)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_END_CONTEXT
+
+'Goto _FINISH_SUITE
+
+_BEGIN_CONTEXT["Socket Recv$ and Socket Recv"]
+_BEGIN_CONTEXT["Socket Recv$"]
+_BEGIN_CONTEXT["Read 20 characters"]
+RESULT$=Socket Recv$(SOCKET,20)
+_ADD_TO_REPORT[RESULT$]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["String can be manipulated"]
+_ADD_TO_REPORT["Cat"+RESULT$+"Dog"]
+_END_CONTEXT
+
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Read"]
+Reserve As Work 20,20
+
+_BEGIN_CONTEXT["Read 20 bytes"]
+RESULT=Socket Recv(SOCKET To Start(20),20)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Data was read"]
+BASE$="12345678901234567890"
+For I=0 To 19
+   Mid$(BASE$,I+1,1)=Chr$(Peek(Start(20)+I))
+Next I
+_ADD_TO_REPORT[BASE$]
+_END_CONTEXT
+
+Erase 20
+_END_CONTEXT
+_END_CONTEXT
+
+_FINISH_SUITE:
+
+_BEGIN_CONTEXT["Socket Library Close"]
+_BEGIN_CONTEXT["Close"]
+Socket Library Close 
+_ADD_TO_REPORT["Success"]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Double close"]
+Socket Library Close 
+_ADD_TO_REPORT["Success"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Call functions with library closed"]
+_=Socket Set Nonblocking(0,True)
+_ADD_TO_REPORT["Socket Set Nonblocking"]
+_=Socket Reuse Addr(0)
+_ADD_TO_REPORT["Socket Reuse Addr"]
+_=Socket Create Inet Socket
+_ADD_TO_REPORT["Socket Create Inet Socket"]
+_=Socket Connect(0 To "",0)
+_ADD_TO_REPORT["Socket Connect"]
+_=Socket Bind(0 To "",0)
+_ADD_TO_REPORT["Socket Bind"]
+_=Socket Listen(0)
+_ADD_TO_REPORT["Socket Listen"]
+_=Socket Accept(0)
+_ADD_TO_REPORT["Socket Accept"]
+_=Socket Wait Async Reading(0,0)
+_ADD_TO_REPORT["Socket Wait Async Reading"]
+_=Socket Wait Async Writing(0,0)
+_ADD_TO_REPORT["Socket Wait Async Writing"]
+_=Socket Set Timeout(0,0)
+_ADD_TO_REPORT["Socket Set Timeout"]
+_=Socket Close Socket(0)
+_ADD_TO_REPORT["Socket Close Socket"]
+_=Socket Send$(0,"")
+_ADD_TO_REPORT["Socket Send$"]
+_=Socket Send(0,0,0)
+_ADD_TO_REPORT["Socket Send"]
+_$=Socket Recv$(0,0)
+_ADD_TO_REPORT["Socket Recv$"]
+_=Socket Recv(0 To 0,0)
+_ADD_TO_REPORT["Socket Recv"]
+_=Socket Get Host(0)
+_ADD_TO_REPORT["Socket Get Host"]
+_=Socket Get Port(0)
+_ADD_TO_REPORT["Socket Get Port"]
+_$=Socket Inet Ntoa$(0)
+_ADD_TO_REPORT["Socket Inet Ntoa$"]
+_=Socket Errno
+_ADD_TO_REPORT["Socket Errno"]
+_=Socket Herrno
+_ADD_TO_REPORT["Socket Herrno"]
+_$=Dns Get Address By Name$("")
+_ADD_TO_REPORT["Dns Get Address By Name$"]
+_END_CONTEXT
+
+Close 1