Remove unneeded files

.gitignore

@@ -4,12 +4,16 @@ dist/
 build/
 aminet/
 Disk.info
+private-test/
 stuff/
+patches/
+.vamosrc
+activate
+test/report.txt
+test/TestSuite.info
+src/report.txt
 src/BSDSocket_Labels.s
 src/BSDSocket_Size.s
 src/bsdsocket_lib.fd
 src/bsdsocket_lvo.i
 src/*.Lib
-.vamosrc
-activate
-test/

API.md

@@ -3,7 +3,9 @@
 Most functions will return -2 if the bsdsocket.library is
 not open.
 
-### Setup
+---
+
+## Setup
 
 #### ADDR=Socket Library Open
 
@@ -16,11 +18,15 @@ Try to open bsdsocket.library version 4.
   * If needed, you'll be able to directly access library functions
     using this address.
 
+---
+
 #### Socket Library Close
 
 Close bsdsocket.library. This is safe to call if the library
 is not open
 
+---
+
 #### RESULT=Socket Set Nonblocking(Socket, IsNonblocking BOOL)
 
 Make a socket blocking (False, default), or nonblocking (True).
@@ -29,6 +35,8 @@ Make a socket blocking (False, default), or nonblocking (True).
 
 * Result of IoctlSocket call.
 
+---
+
 #### RESULT=Socket Reuse Addr(Socket)
 
 Make a listening socket reuse the address it's trying to bind to.
@@ -38,9 +46,9 @@ You probably want to call this right before Socket Listen.
 
 * Result of setsockopt call.
 
+---
 
-
-### Connections
+## Connections
 
 #### SOCKET=Socket Create Inet Socket
 
@@ -51,10 +59,23 @@ Create a new Internet socket for reading or writing.
 * Socket number on success
 * -1 on failure
 
+---
+
 #### RESULT=Socket Connect(Socket to IPAddress$, Port)
 
-Attempt to connect to a remote host. Currently doesn't
-support DNS lookups.
+Attempt to connect to a remote IP address.
+
+##### Emulation vs. Physical/FPGA Amiga note
+
+On emulated Amigas (FS-UAE) with emulated `bsdsocket.library`, a failure in
+`Socket Connect` due to giving the function a bad IP address allows you to reuse
+the socket. On real or FPGA-based Amiga running real TCP/IP stacks (MiamiDX,
+Roadshow), the socket will be made unusable and you'll need to
+`Socket Close Socket` and reopen the socket with whatever parameters necessary.
+Closing and opening `bsdsocket.library` has the same effect.
+
+Always close and re-open a socket if you have any `Socket Connect` failure and
+any non-blocking polling loops time out!
 
 ##### Returns
 
@@ -64,19 +85,24 @@ support DNS lookups.
     the socket with Socket Select and Socket Getsockopt Int
     to see if the connection succeeded
 * -11 port out of range
+* -13 IP address has zero length
+
+---
 
 #### RESULT=Socket Reuse Addr(Socket)
 
 Set a server socket to reuse an interface and port that had
 been used recently. You likely want this if you're building
 something that listens on a port for connections. This calls
-setsockopt() for you.
+`setsockopt()` for you.
 
 ##### Returns
 
 The result of calling setsockopt() while setting your socket
 to reuse addresses.
 
+---
+
 #### RESULT=Socket Bind(Socket to IPAddress, Port)
 
 Attempt to bind a socket to a network interface. Use
@@ -89,6 +115,8 @@ interfaces.
 * -1 on other error
 * -11 port out of range
 
+---
+
 #### RESULT=Socket Listen(Socket)
 
 Start listening for connections.
@@ -98,6 +126,8 @@ Start listening for connections.
 * 0 on success
 * -1 on failure
 
+---
+
 #### NEW_SOCKET=Socket Accept(Socket)
 
 Get the socket that connected to this one. Wait for a connect
@@ -115,11 +145,13 @@ socket non-blocking and use Fdsets and Select!
 * The remote socket number on success
 * -1 on failure
 
-#### RESULT=Socket Async Wait Reading(Socket, Wait_ms)
+---
+
+#### RESULT=Socket Wait Async Reading(Socket, Wait_ms)
 
 Wait the given number of milliseconds for the nonblocking socket to be ready for reading.
-Use this when you're waiting for a client to connect to you, or if you're waiting for
-a remote socket to send you data.
+Use on a listen socket to await new connections, or on a connected socket to await
+incoming data packets.
 
 ##### Returns
 
@@ -127,7 +159,9 @@ a remote socket to send you data.
 * -1 on error. Use `Socket Errno` for more detail.
 * 1 on success.
 
-#### RESULT=Socket Async Wait Writing(Socket, Wait_ms)
+---
+
+#### RESULT=Socket Wait Async Writing(Socket, Wait_ms)
 
 Wait the given number of milliseconds for the nonblocking socket to be ready for writing.
 Use this when you're connecting to a remote server and want to know if the connection
@@ -143,6 +177,8 @@ has been completed.
     checks will return 1.
 * 1 on success.
 
+---
+
 #### RESULT=Socket Set Timeout(Socket, Wait_ms)
 
 Set a socket to timeout after Wait_ms milliseconds if reading or writing doesn't complete.
@@ -152,18 +188,21 @@ Set a socket to timeout after Wait_ms milliseconds if reading or writing doesn't
 * 0 on success
 * -1 on error
 
+---
+
 #### RESULT=Socket Close Socket(Socket)
 
 Close a socket.
 
+
 ##### Returns
 
 * 0 on success
 * -1 on error
 
+---
 
-
-### Data Transfers
+## Data Transfers
 
 #### SENT=Socket Send$(Socket, String$)
 
@@ -194,6 +233,8 @@ End Proc
 * Number of characters sent
 * -1 on other error
 
+---
+
 #### SENT=Socket Send(Socket, Data Pointer, Length)
 
 Send a block of data to a connected socket.
@@ -203,6 +244,8 @@ Send a block of data to a connected socket.
 * Number of characters sent
 * -1 on other error
 
+---
+
 #### DATA$=Socket Recv$(Socket, MaxLength)
 
 Retrieve at most MaxLength bytes from Socket, and put them into a string.
@@ -212,7 +255,9 @@ If Len(DATA$) < MaxLength, you've read the last bit of data from the socket.
 
 * String of data, which is blank if there is no more data.
 
-### LENGTH=Socket Recv(Socket to Dataptr, MaxLength)
+---
+
+#### LENGTH=Socket Recv(Socket to Dataptr, MaxLength)
 
 Retrieve at most MaxLength bytes from Socket, and put them into the memory
 address at Dataptr.
@@ -222,9 +267,9 @@ address at Dataptr.
 * Count of bytes read
 * -1 on error
 
+---
 
-
-### Informational
+## Informational
 
 #### HOST=Socket Get Host(Socket)
 
@@ -234,6 +279,8 @@ Get the IPv4 (Long) host value the given socket is using.
 
 * Host as a long value
 
+---
+
 #### PORT=Socket Get Port(Socket)
 
 Get the 16-bit port (Word) value the given socket is using.
@@ -242,6 +289,8 @@ Get the 16-bit port (Word) value the given socket is using.
 
 * Port as a word value
 
+---
+
 #### RESULT$=Socket Inet Ntoa$(Host)
 
 Turn a long Host address into a string.
@@ -250,6 +299,8 @@ Turn a long Host address into a string.
 
 * IP address as string
 
+---
+
 #### RESULT=Socket Errno
 
 Get the error from the last command. Note that this is
@@ -260,6 +311,8 @@ not cleared on a successful command!
 Error number from last call. Look in <sys/error.h> for more
 details.
 
+---
+
 #### RESULT=Socket Herrno
 
 Get the error from the last DNS resolver command.
@@ -268,6 +321,8 @@ Get the error from the last DNS resolver command.
 
 Resolver error number (`h_errno`) from last call.
 
+---
+
 #### RESULT$=Dns Get Address By Name$(Domain Name$)
 
 Look up the first IP address associated with this hostname.
@@ -282,32 +337,8 @@ out. There's no way to set this timeout, or cancel or override it via AMOS.
 
 String with IP address, or blank string on error.
 
-#### RESULT=Socket Status(Socket)
 
-Returns basic connection information about a socket.
-
-##### Warning
-
-Since none of the socket processing of this extension happens in the
-background, you're likely better off using other means to detect
-socket status.
-
-* Disconnected: Try a recv and get zero bytes back. Check Socket Errno.
-* Broken: Try a send. If it fails, check Socket Errno.
-* Ready: Use the Async Wait functions.
-
-##### Returns
-
-Status of socket:
-
-* 0 = Closed
-* 2 = Listening
-* 6 = Connecting
-* 7 = Connected
-
-
-
-### Low Level
+## Low Level
 
 #### RESULT=Socket Setsockopt Int(Socket, Option, Value)
 
@@ -319,6 +350,8 @@ Socket Reuse Addr().
 
 * Result of setsockopt call
 
+---
+
 #### RESULT=Socket Getsockopt Int(Socket, Option)
 
 Get a socket option. You probably want SO_ERROR,
@@ -329,6 +362,8 @@ attempt a connection with a non-blocking socket.
 
 * Result of getsockopt call
 
+---
+
 #### ADDR=Socket Fdset Zero(fd_set)
 
 Clear out the specified fd_set.
@@ -338,6 +373,8 @@ Clear out the specified fd_set.
 * Address to that particular fd_set
 * -1 if fd_set out of range. You get 16 of them.
 
+---
+
 #### ADDR=Socket Fdset Set(fd_set, Socket to Value BOOL)
 
 Set or clear a socket bit in an fd_set.

README.md

@@ -130,6 +130,7 @@ Socket Library Close
 * [Hop to the Top: Bunny's Revenge](https://rabbit.robsmithdev.co.uk/)
   * The game uses this extension to send and receive high score information.
     I also did some of the art for the game!
+* [Gopherized](https://allanon71.itch.io/gopherized)
 
 Doing something cool with the extension?
 [Contact me](https://theindustriousrabbit.com/about) and I'll add it to the list!
@@ -168,10 +169,12 @@ throw a link to theindustriousrabbit.com somewhere! You can
 also find a donate link on
 [the About section on The Industrious Rabbit](https://theindustriousrabbit.com/about).
 
-## Feedback? Bug reports?
+## Feedback? Bug reports? Patches?
 
-Go to the [About section on The Industrious Rabbit](https://theindustriousrabbit.com/about)
-to contact me.
+First, run `test/TestSuite` to generate a `report.txt` file.
+
+Then, go to the [About section on The Industrious Rabbit](https://theindustriousrabbit.com/about)
+to contact me, send the `report.txt` along with the details on your issue.
 
 ## Changelog
 
@@ -207,7 +210,20 @@ to contact me.
   * `Dns Get Address By Name$`
   * `Socket Recv$`
 
-# Development
+### 1.1.3
+
+Internal release.
+
+### 1.1.4 (2024-05-02)
+
+* Fix bug in fdset macro where using D3 for a parameter could cause corruption.
+* Copy a null-terminated copy of IP address for `SocketIPAddressPortToSockaddr`.
+* Add test suite to exercise extension functionality.
+* Fix several crash bugs found due to the test suite.
+* Retructure API docs for easier reading.
+* Improve build and release tooling.
+
+## Development
 
 ### Environment
 
@@ -216,10 +232,22 @@ to contact me.
 * Clone the [AMOS Professional source code](https://github.com/AOZ-Studio/AMOS-Professional-Official)
   * Copy `AMOSPro Sources/+lequ.s` to `+LEqu.s`
 * Generate the socket LVO file in the `src` directory
- * Download `https://raw.githubusercontent.com/cnvogelg/amitools/master/amitools/data/fd/bsdsocket_lib.fd` to `src`
- * `fd2pragma bsdsocket_lib.fd to "" special 20`
-* Fix up `absdsocket` to match your system's setup
-* Run `execute absdsocket`
+  * Install [`fd2pragma`](https://aminet.net/package/dev/misc/fd2pragma) in your path
+  * Download `https://raw.githubusercontent.com/cnvogelg/amitools/master/amitools/data/fd/bsdsocket_lib.fd` to `src`
+  * In a Shell:
+
+    ```
+    cd src
+    fd2pragma bsdsocket_lib.fd to "" special 20
+    ```
+
+* Fix up `src/absdsocket` to match your system's setup
+* In a Shell:
+
+```
+cd src
+execute absdsocket
+```
 
 #### Emulated setup (WinUAE, FS-UAE, Amiberry)
 
@@ -227,9 +255,25 @@ Run `bin/setup` to do most of the setups above.
 
 ### Debugging
 
+#### Cross-platform
+
 Modify data in the `DebugArea` and read it by `Peek`/`Deek`/`Leek`ing from
 the base address provided by `Socket Get Debug Area`.
 
+#### WinUAE/FS-UAE
+
+In the debugger, set a memory breakpoint at `$100` for two written bytes:
+
+```
+w 0 100 2
+```
+
+Then, in your code, clear those two bytes to stop execution at that point:
+
+```asm
+  CLR.W $100
+```
+
 ### Releasing
 
 #### Ubuntu/Debian

bin/rebuild_raw_source

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-for i in examples/*.amos; do
+for i in examples/*.amos test/*.amos; do
   echo "$i"
-  ~/Projects/amostools/listamos -e AMOSPro_BSDSocket.Lib "${i}" > "${i%.amos}.basic" 2>/dev/null
+  ~/Projects/amostools/listamos -e src/AMOSPro_BSDSocket.Lib "${i}" > "${i%.amos}.basic" 2>/dev/null
 done

bin/release

@@ -24,6 +24,22 @@ source.lines.each do |line|
   end
 end
 
+FileUtils.cp 'src/AMOSPro_BSDSocket.Lib', 'AMOSPro_BSDSocket.Lib'
+
+strings = []
+Open3.popen2e('strings', 'AMOSPro_BSDSocket.Lib') do |stdin, stdout_and_stderr, wait_thr|
+  stdin.close
+
+  stdout_and_stderr.each { |l| strings << l }
+
+  wait_thr.join
+end
+
+unless strings.any? { |s| s[version] }
+  puts "Extension build doesn't match source version! Did you rebuild it yet on the Amiga?"
+  exit 1
+end
+
 FileUtils.mkdir_p 'dist'
 
 build_base = 'build'
@@ -35,8 +51,6 @@ FileUtils.rm_rf 'aminet'
 FileUtils.mkdir_p build_dir
 FileUtils.mkdir_p 'aminet'
 
-FileUtils.mv 'src/AMOSPro_BSDSocket.Lib', 'AMOSPro_BSDSocket.Lib' if File.exist?('src/AMOSPro_BSDSocket.Lib')
-
 hackerbun_target = File.expand_path("dist/AMOSPro_BSDSocket_#{version}.lha")
 
 [

src/AMOSMacros.s

@@ -1,42 +0,0 @@
-; get the effective address of something in extension memory
-Dlea    MACRO
-        MOVE.L ExtAdr+ExtNb*16(A5),\2
-        ADD.W #\1-MB,\2
-        ENDM
-
-; load the base of extension memory into a register
-Dload   MACRO
-        MOVE.L ExtAdr+ExtNb*16(A5),\1
-        ENDM
-
-; wrap code that doesn't take arguments with these
-PreserveStackInstruction MACRO
-  MOVEM.L A2-A6/D6-D7,-(SP)
-  ENDM
-RestoreStackInstruction MACRO
-  MOVEM.L (SP)+,A2-A6/D6-D7
-  ENDM
-
-; wrap code that takes arguments with these
-PreserveStackFunction MACRO
-  MOVEM.L A2/A4-A6/D6-D7,-(SP)
-  ENDM
-RestoreStackFunction MACRO
-  MOVEM.L (SP)+,A2/A4-A6/D6-D7
-  ENDM
-
-; Push and pop the extension's data storage into A3
-WithDataStorageToA3 MACRO
-  MOVE.L A3,-(SP)
-  Dload A3
-  ENDM
-EndDataStorage MACRO
-  MOVE.L (SP)+,A3
-  ENDM
-
-EvenOutStringAddress MACRO
-    MOVE.W \1,\2
-    AND.W #$0001,\2
-    ADD.W \2,\1
-    ENDM
-

src/BSDSocket.s

@@ -7,7 +7,7 @@
 ; extension number 18
 ExtNb           equ 18-1
 Version         MACRO
-                dc.b "1.1.2-20240318"
+                dc.b "1.1.4-20240502"
                 ENDM
 VerNumber       equ $1
 
@@ -22,23 +22,190 @@ VerNumber       equ $1
         Include "+AMOS_Includes.s"
         Include "bsdsocket_lvo.i"
 
-        Include "LongDivide.s"
-        Include "Constants.s"
-        Include "fd_set.s"
-        Include "AMOSMacros.s"
+; get the effective address of something in extension memory
+Dlea    MACRO
+        MOVE.L ExtAdr+ExtNb*16(A5),\2
+        ADD.W #\1-MB,\2
+        ENDM
 
+; load the base of extension memory into a register
+Dload   MACRO
+        MOVE.L ExtAdr+ExtNb*16(A5),\1
+        ENDM
 
 ; call an AmigaOS function via LVO(A6)
 CALLLIB MACRO
         JSR _LVO\1(A6)
         ENDM
 
+; bsdsocket library stuff
+; ported from the various C include headers
+SOCK_STREAM EQU 1
+PF_INET     EQU 2
+AF_INET     EQU PF_INET
+IPPROTO_TCP EQU 6
 
-; get the BSDSocket library ready for CALLLIB
-LoadBSDSocketBaseFromA3 MACRO
+INADDR_ANY  EQU 0
+
+FIONBIO     EQU $8004667E
+FIONASYNC   EQU $8004667D
+
+SOL_SOCKET  EQU $FFFF
+SO_REUSEADDR EQU $4
+
+MAX_SOCKETS EQU 64
+
+len_sockaddr_in        EQU 16
+sockaddr_in_sin_family EQU 1
+sockaddr_in_sin_port   EQU 2
+sockaddr_in_sin_addr   EQU 4
+
+; global errors
+Error_OtherError             EQU -1
+Error_LibraryNotOpen         EQU -2
+Error_PortOutOfRange         EQU -11
+Error_FdsetOutOfRange        EQU -11
+Error_UnableToBind           EQU -12
+
+; socket herrno and tag lists
+; built from:
+; * https://wiki.amigaos.net/amiga/autodocs/bsdsocket.doc.txt
+; * https://github.com/deplinenoise/amiga-sdk/blob/master/netinclude/amitcp/socketbasetags.h
+; * http://amigadev.elowar.com/read/ADCD_2.1/Includes_and_Autodocs_2._guide/node012E.html
+
+TAG_USER EQU (1<<31)
+SBTF_REF EQU $8000
+SBTB_CODE EQU 1
+SBTS_CODE EQU $3FFF
+SBTC_HERRNO EQU 6
+
+HerrnoTag EQU (TAG_USER|SBTF_REF|((SBTC_HERRNO&SBTS_CODE)<<SBTB_CODE))
+
+; wrap code that doesn't take arguments with these
+PreserveStackInstruction MACRO
+  MOVEM.L A2-A6/D6-D7,-(SP)
+  ENDM
+RestoreStackInstruction MACRO
+  MOVEM.L (SP)+,A2-A6/D6-D7
+  ENDM
+
+; wrap code that takes arguments with these
+PreserveStackFunction MACRO
+  MOVEM.L A2/A4-A6/D6-D7,-(SP)
+  ENDM
+RestoreStackFunction MACRO
+  MOVEM.L (SP)+,A2/A4-A6/D6-D7
+  ENDM
+
+LoadBSDSocketBase MACRO
   MOVE.L BSDSocketBase-MB(A3),A6
   ENDM
 
+WithDataStorage MACRO
+  MOVE.L A3,-(SP)
+  Dload A3
+  ENDM
+
+EndDataStorage MACRO
+  MOVE.L (SP)+,A3
+  ENDM
+
+; fdset macros
+EnsureValidFdset MACRO
+    CMP.L #MaxFd_sets,\1
+    BLT \2
+
+    MOVE.L #Error_FdsetOutOfRange,D3
+    RestoreStackFunction
+    Ret_Int
+    ENDM
+
+EnsureValidFdsetBit MACRO
+    CMP.L #64,\1
+    BGE _EnsureValidFdsetBit_Fail\@
+    BRA \2
+_EnsureValidFdsetBit_Fail\@:
+    MOVE.L \3,D3
+    RestoreStackFunction
+    Ret_Int
+    ENDM
+
+LeaFdset MACRO
+    MOVE.L \1,-(SP)
+    Dlea fd_sets,\2 ; base of all, these are longs
+    ROL.L #3,\1     ; multiply by 8
+    ADD.L \1,\2     ; add to base of all
+    MOVE.L (SP)+,\1
+    ENDM
+
+; LeaFdsetForBit fd_set reg,target address,target bit in address
+LeaFdsetForBit MACRO
+  LeaFdset \1,\2 ; get fdset base address in \2
+  MOVEM.L D3-D4,-(SP)
+    MOVE.L \3,D3 ; Put target bit into D3
+    ROR.L #5,D3  ; lop off the first 5 bits
+    AND.L #$7,D3 ; only keep the top three
+    ROL.L #2,D3  ; multiply by 4
+    ADD.L D3,\2  ; add that value to the fdset address
+
+    MOVE.L \3,D4
+    AND.L #$1F,D4 ; only keep 0-31 in \3
+
+    MOVEQ #1,D3
+    ROL.L D4,D3   ; shift that bit left as many as target
+    MOVE.L D3,\3  ; put that in the target
+  MOVEM.L (SP)+,D3-D4
+
+  ENDM
+
+; d0 = value to be divided
+; d1 = divisor
+; returns:
+; d0 = divided value
+; d1 = remainder
+LongDivideD0ByD1 MACRO
+  CMP.L D0,D1
+  BMI _LongDivide_StartDivide\@
+
+  MOVE.L D0,D1
+  MOVEQ #0,D0
+  BRA _LongDivide_Skip\@
+
+_LongDivide_StartDivide\@:
+
+  MOVEM.L D2-D4,-(SP)
+    MOVEQ #0,D2      ; remainder
+    MOVE.L #31,D3    ; bit tracking
+                     ; d4 tracks the status register
+
+_LongDivide_ContinueDivide\@:
+    ASL.L #1,D0
+    SCS D4      ; bit that got rolled out
+    AND.L #1,D4
+    ROL.L #1,D2
+    ADD.L D4,D2 ; roll the value onto the remainder
+
+    MOVE.L D2,D4
+    SUB.L D1,D4
+
+    BMI _LongDivide_NotDivisible\@
+    ADDQ #1,D0
+    MOVE.L D4,D2
+
+_LongDivide_NotDivisible\@:
+    DBRA D3,_LongDivide_ContinueDivide\@
+    MOVE.L D2,D1
+  MOVEM.L (SP)+,D2-D4
+
+_LongDivide_Skip\@:
+  ENDM
+
+EvenOutStringAddress MACRO
+    MOVE.W \1,\2
+    AND.W #$0001,\2
+    ADD.W \2,\1
+    ENDM
+
 ; check if we've opened the bsd socket library
 ; we do this a lot, this could probably become something
 ; we jsr to...
@@ -290,16 +457,16 @@ End
     CALLLIB OpenLibrary
 
     MOVE.L D0,BSDSocketBase-MB(A3)
-    BEQ .Finish
+    BEQ _SocketLibraryOpen_Finish
 
     ; reserve ram for sockaddr_ins
     MOVE.L #MAX_SOCKETS*len_sockaddr_in,D0
     Rjsr L_RamFast
-    BEQ .Finish
+    BEQ _SocketLibraryOpen_Finish
 
     MOVE.L D0,sockaddr_ram-MB(A3)
 
-.Finish:
+_SocketLibraryOpen_Finish:
     MOVE.L BSDSocketBase-MB(A3),D3
 
     RestoreStackInstruction
@@ -345,7 +512,7 @@ End
 ;
 ; Turn an IP address and port into a sockaddr_in strucure
 ;
-; d0 - 0 on success, -1 on failure
+; d0 - address of sockaddr_in on success, -1 on failure
 ; - - - - - - - -
     Lib_Def SocketIPAddressPortToSockaddr
 
@@ -366,14 +533,26 @@ _ToSockaddr_PortOK:
       MOVE.L sockaddr_ram-MB(A3),A0
       ADD.L D3,A0 ; A0 contains our offset in ram
 
-      MOVE.B #len_sockaddr_in,sockaddr_in_sin_len(A0)
-      MOVE.B #AF_INET,sockaddr_in_sin_family(A0)
-      MOVE.W D2,sockaddr_in_sin_port(A0)
-
       MOVEM.L A0-A3/D3,-(SP)
+        MOVE.L D1,A1    ; ip string address
+        MOVE.W (A1)+,D3 ; string length
 
-        MOVE.L D1,A0 ; ip address
-        ADDQ #2,A0   ; string data starts 2 bytes in
+        BNE _ToSockaddr_StringHasLength
+      MOVEM.L (SP)+,A0-A3/D3
+    MOVEM.L (SP)+,A0/A3/D3
+
+    MOVE.L #-14,D0
+    RTS
+
+_ToSockaddr_StringHasLength:
+
+        ; temporarily store a null-terminated copy of the ip string in A0
+        MOVE.L A0,A2
+        SUBQ #1,D3      ; DBRA loop runs D3 + 1 times
+_ToSockaddr_CopyIPString:
+        MOVE.B (A1)+,(A2)+
+        DBRA D3,_ToSockaddr_CopyIPString
+        MOVE.B #0,(A2)  ; end of string
 
         ; if the string contains "INADDR_ANY", we use that value instead
         MOVE.L A0,A1
@@ -393,12 +572,20 @@ _ToSockaddr_KeepCheckingString_2:
 
 _ToSockaddr_ParseIPAddress:
         Dload A3
-        LoadBSDSocketBaseFromA3
+        LoadBSDSocketBase
         CALLLIB inet_addr
 
 _ToSockaddr_DoneParsing:
       MOVEM.L (SP)+,A0-A3/D3
-      MOVE.L D0,sockaddr_in_sin_addr(A0)
+
+      ; create struct sockaddr_in
+      MOVE.B #len_sockaddr_in,(A0)
+      MOVE.B #AF_INET,sockaddr_in_sin_family(A0)
+      MOVE.W D2,sockaddr_in_sin_port(A0)
+      LEA sockaddr_in_sin_addr(A0),A3
+      MOVE.L D0,(A3)+
+      CLR.L (A3)+
+      CLR.L (A3)+
 
       MOVE.L A0,D0
     MOVEM.L (SP)+,A0/A3/D3
@@ -429,7 +616,7 @@ _SocketCreateInetSocket_LibraryOpen:
     MOVE.L #SOCK_STREAM,D1
     MOVE.L #IPPROTO_TCP,D2
     Dload A3
-    LoadBSDSocketBaseFromA3
+    LoadBSDSocketBase
     CALLLIB socket
 
     MOVE.L D0,D3
@@ -478,7 +665,6 @@ _SocketCreateInetSocket_Done:
     Ret_Int
 
 _SocketConnect_LibraryOpen:
-
     MOVE.L D0,-(SP) ; socket id onto stack
 
       Rbsr L_SocketIPAddressPortToSockaddr
@@ -502,7 +688,7 @@ _SocketConnect_SockaddrIn:
                                    ; socket id is in D0
                                    ; sockaddr_in is in A0
         MOVE.L #len_sockaddr_in,D1 ; len
-        LoadBSDSocketBaseFromA3
+        LoadBSDSocketBase
         CALLLIB connect
       MOVEM.L (SP)+,A0/A3
 
@@ -538,8 +724,8 @@ _SocketConnect_SockaddrIn:
 _SocketSendString_LibraryOpen:
    MOVEQ #0,D2     ; flags
 
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB send
     EndDataStorage
 
@@ -584,8 +770,8 @@ _SocketSendData_LibraryOpen:
 _SocketSendData_NotNegative:
     MOVEQ #0,D2     ; flags
 
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB send
     EndDataStorage
 
@@ -635,11 +821,11 @@ _SocketBind_SockaddrIn:
       MOVE.L D0,A0
     MOVE.L (SP)+,D0
 
-    WithDataStorageToA3
+    WithDataStorage
       ; socket id is in D0
       ; sockaddr_in is in A0
       MOVE.L #len_sockaddr_in,D1 ; len
-      LoadBSDSocketBaseFromA3
+      LoadBSDSocketBase
       CALLLIB bind
     EndDataStorage
 
@@ -658,22 +844,22 @@ _SocketBind_SockaddrIn:
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
     Lib_Par SocketErrno
 ; - - - - - - - - - - - - -
-    PreserveStackInstruction
+    PreserveStackFunction
 
     EnsureBSDSocketLibrary _SocketErrno_LibraryOpen
 
-    RestoreStackInstruction
+    RestoreStackFunction
     Ret_Int
 
 _SocketErrno_LibraryOpen:
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB Errno
     EndDataStorage
 
     MOVE.L D0,D3
 
-    RestoreStackInstruction
+    RestoreStackFunction
     RTS
 
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
@@ -701,8 +887,8 @@ _SocketListen_LibraryOpen:
    MOVE.L D3,D2
     MOVEQ #5,D1
 
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB listen
     EndDataStorage
 
@@ -737,10 +923,10 @@ _SocketAccept_LibraryOpen:
 
    MOVE.L D3,D2
 
-    WithDataStorageToA3
+    WithDataStorage
       Dlea AcceptScratchArea,A0
       Dlea len_sockaddr_in_ptr,A1
-      LoadBSDSocketBaseFromA3
+      LoadBSDSocketBase
       CALLLIB accept
     EndDataStorage
 
@@ -803,11 +989,11 @@ _SocketSetNonblocking_IsBlocking:
 
 _SocketSetNonblocking_Ioctl:
 
-    WithDataStorageToA3
+    WithDataStorage
       MOVE.L D1,IoctlSockOptScratch-MB(A3)
       Dlea IoctlSockOptScratch,A0
       MOVE.L #FIONBIO,D1
-      LoadBSDSocketBaseFromA3
+      LoadBSDSocketBase
       CALLLIB IoctlSocket
       
       MOVE.L D0,D3
@@ -865,12 +1051,12 @@ _SocketGetsockoptInt_LibraryOpen:
     MOVE.L #SOL_SOCKET,D1 ; level
 
     MOVE.L A3,-(SP)
-      WithDataStorageToA3
+      WithDataStorage
         Dlea IoctlSockOptScratch,A0 ; optval
         MOVE.L #4,getsockopt_len-MB(A3)
         Dlea getsockopt_len,A1
 
-        LoadBSDSocketBaseFromA3
+        LoadBSDSocketBase
         CALLLIB getsockopt
       EndDataStorage
     MOVE.L (SP)+,A3
@@ -1144,6 +1330,12 @@ _SocketSelect_PerformSelect
 ; - - - - - - - - - - - - -
     PreserveStackFunction
 
+    EnsureBSDSocketLibrary _SocketGetHost_LibraryOpen
+
+    RestoreStackFunction
+    Ret_Int
+
+_SocketGetHost_LibraryOpen:
     MULU #len_sockaddr_in,D3
     Dload A0
     MOVE.L sockaddr_ram-MB(A0),A0
@@ -1164,6 +1356,13 @@ _SocketSelect_PerformSelect
 ; - - - - - - - - - - - - -
     PreserveStackFunction
 
+    EnsureBSDSocketLibrary _SocketGetPort_LibraryOpen
+
+    RestoreStackFunction
+    Ret_Int
+
+_SocketGetPort_LibraryOpen:
+
     MULU #len_sockaddr_in,D3
     Dload A0
     MOVE.L sockaddr_ram-MB(A0),A0
@@ -1184,15 +1383,17 @@ _SocketSelect_PerformSelect
     Lib_Par SocketInetNtoA
 ; - - - - - - - - - - - - -
     PreserveStackFunction
-    EnsureBSDSocketLibrary _SocketInetNtoA_LibraryOpen
+    EnsureBSDSocketLibrary _SocketInetNtoa_LibraryOpen
+
+    MOVE.L ChVide(A5),D3
 
     RestoreStackFunction
-    Ret_Int
+    Ret_String
 
-_SocketInetNtoA_LibraryOpen:
+_SocketInetNtoa_LibraryOpen:
     MOVE.L D3,D0
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB Inet_NtoA
     EndDataStorage
 
@@ -1222,6 +1423,7 @@ _SocketInetNtoA_StringSizeLoop:
 
     MOVE.W D4,(A0)+ ; length of string
     SUBQ #1,D4
+
 _SocketInetNtoA_StringCopyLoop:
     MOVE.B (A2,D4),(A0,D4)
     DBRA D4,_SocketInetNtoA_StringCopyLoop
@@ -1272,12 +1474,14 @@ _SocketRecvString_NotNegative:
 
 _SocketRecvString_NotTooLong:
     MOVE.L A3,-(SP) ; preserve A3
+
       MOVE.L D0,-(SP) ; preserve D0
         ; reserve memory for recv buffer
         Rjsr L_RamFast ; D0 now contains memory pointer
         BNE _SocketRecvString_BufferAllocated
         ; reserve failed
       MOVE.L (SP)+,D0
+
     MOVE.L (SP)+,A3
 
     MOVE.L ChVide(A5),D3 ; empty string
@@ -1291,10 +1495,12 @@ _SocketRecvString_BufferAllocated:
       MOVEQ #0,D2     ; flags
 
       MOVEM.L A0-A1/D1,-(SP)
-        WithDataStorageToA3
-          LoadBSDSocketBaseFromA3
+
+        WithDataStorage
+          LoadBSDSocketBase
           CALLLIB recv ; D0 has received length or -1
         EndDataStorage
+
       MOVEM.L (SP)+,A0-A1/D1
 
       ; did we receive data? if we didn't get a single byte, we're done
@@ -1305,6 +1511,7 @@ _SocketRecvString_BufferAllocated:
       MOVE.L D1,D0
       MOVE.L A0,A1
       Rjsr L_RamFree
+
     MOVE.L (SP)+,A3
 
     MOVE.L ChVide(A5),D3
@@ -1312,7 +1519,6 @@ _SocketRecvString_BufferAllocated:
     Ret_String
 
     ; TODO received data is wrong somewhere
-
 _SocketRecvString_DataReceived:
       ; D0 contains socket receive length
 
@@ -1344,7 +1550,7 @@ _SocketRecvString_CopyData:
       MOVE.L A0,-(SP)
         MOVE.L A3,A1
         Rjsr L_RamFree
-      MOVE.L (SP)+,D3
+      MOVE.L (SP)+,D3 ; string return
     MOVE.L (SP)+,A3
 
     RestoreStackFunction
@@ -1383,8 +1589,8 @@ _SocketRecvData_LibraryOpen:
     Ret_Int
 
 _SocketRecvData_PositiveLength:
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB recv ; D0 has received length or -1
     EndDataStorage
 
@@ -1393,6 +1599,8 @@ _SocketRecvData_PositiveLength:
     RestoreStackFunction
     Ret_Int
 
+
+
     ; actually close the library
 
     Lib_Def DoSocketLibraryClose
@@ -1407,6 +1615,7 @@ _SocketRecvData_PositiveLength:
     CLR.L sockaddr_ram-MB(A3) ; prevent double free
 
 _DoSocketLibraryClose_CloseLibrary:
+
     MOVE.L BSDSocketBase-MB(A3),D0
 
     BEQ _DoSocketLibraryClose_Skip
@@ -1463,7 +1672,7 @@ _SocketWaitAsyncWriting_LibraryOpen:
       Rbsr L_MicrosecondsToTimeval ; A3 contains timeval
 
       Dload A4
-      MOVE.L D0,-(SP)
+      MOVEM.L D0,-(SP)
         ; set up WaitSelect
         MOVEQ #0,D1
         LeaFdset D1,A1 ; write fdset
@@ -1485,7 +1694,7 @@ _SocketWaitAsyncWriting_LibraryOpen:
         TST.L D0
         BEQ _SocketWaitAsyncWriting_Timeout
         BMI _SocketWaitAsyncWriting_Error
-      MOVE.L (SP)+,D0 ; D0 contains socket again
+      MOVEM.L (SP)+,D0 ; D0 contains socket again
 
       Dload A4
       ; a socket became interesting, check the Fdset
@@ -1511,19 +1720,19 @@ _SocketWaitAsyncWriting_CheckSockopt:
 
       MOVE.L A3,-(SP)
 
-        WithDataStorageToA3
+        WithDataStorage
           Dlea IoctlSockOptScratch,A0 ; optval
           MOVE.L #4,getsockopt_len-MB(A3)
           Dlea getsockopt_len,A1
 
-          LoadBSDSocketBaseFromA3
+          LoadBSDSocketBase
           CALLLIB getsockopt
         EndDataStorage
 
       MOVE.L (SP)+,A3
 
       TST.L D0
-      BMI _SocketWaitAsyncWriting_Error
+      BMI _SocketWaitAsyncWriting_Error2
 
       Dlea IoctlSockOptScratch,A0
       MOVE.L (A0),D0
@@ -1545,6 +1754,7 @@ _SocketWaitAsyncWriting_Ready:
 
 _SocketWaitAsyncWriting_Error:
       MOVE.L (SP)+,D1
+_SocketWaitAsyncWriting_Error2:
     MOVEM.L (SP)+,A3-A4
 
     MOVE.L #-1,D3
@@ -1626,7 +1836,6 @@ _SocketWaitAsyncReading_LibraryOpen:
         BMI _SocketWaitAsyncReading_Done
       MOVE.L (SP)+,D0 ; D0 contains socket again
 
-      ;Dload A4
       ; a socket became interesting, check the Fdset
       MOVE.L D0,D3               ; socket in D3
       MOVEQ #0,D1                ; fdset in D1
@@ -1721,12 +1930,12 @@ _SocketReuseAddr_LibraryOpen:
 
       MOVE.L #SOL_SOCKET,D1 ; Level
 
-      WithDataStorageToA3
+      WithDataStorage
         Dlea IoctlSockOptScratch,A0 ; optval
         MOVE.L D3,A0
         MOVEQ #4,D3
 
-        LoadBSDSocketBaseFromA3
+        LoadBSDSocketBase
         CALLLIB setsockopt
       EndDataStorage
 
@@ -1737,44 +1946,46 @@ _SocketReuseAddr_LibraryOpen:
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 ;   =Dns Get Address By Name$(Name String)
 ;
-;   Get the status of a socket
+;   Convert a host name to an IP address
 ; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
     Lib_Par DnsGetHostAddressByName
 
     PreserveStackFunction
-    EnsureBSDSocketLibrary .LibraryOpen
+    EnsureBSDSocketLibrary _DnsGetHostAddressByName_LibraryOpen
 
     MOVE.L ChVide(A5),D3
 
     RestoreStackFunction
     Ret_String
 
-.LibraryOpen:
+_DnsGetHostAddressByName_LibraryOpen:
     ; string so you need demande, hichaine, and chvide
     MOVE.L D3,A0 ; name
+    MOVEQ #0,D0
     MOVE.W (A0)+,D0 ; d0 contains length
     MOVE.L D0,D1    ; d1 also has length
     MOVE.L D0,D2    ; d2 also has length
     Rjsr L_RamFast  ; d0 contains address
-    BNE .StringRamAllocated
+    BNE _DnsGetHostAddressByName_StringRamAllocated
 
     MOVE.L ChVide(A5),D3
 
     RestoreStackFunction
     Ret_String
 
-.StringRamAllocated:
+_DnsGetHostAddressByName_StringRamAllocated:
     MOVE.L D0,A1 ; a1 contains address
     SUBQ #1,D1   ; reduce by one for DBRA
-.KeepCopyingAMOSString
+
+_DnsGetHostAddressByName_KeepCopyingAMOSString:
     MOVE.B (A0)+,(A1)+ ; byte copy
-    DBRA D1,.KeepCopyingAMOSString ; keep copying
+    DBRA D1,_DnsGetHostAddressByName_KeepCopyingAMOSString ; keep copying
     MOVE.B #0,(A1)+ ; null terminate string
     MOVE.L D0,A0 ; first param of gethostbyname
 
     MOVEM.L A0/D2,-(SP)
-      WithDataStorageToA3
-        LoadBSDSocketBaseFromA3
+      WithDataStorage
+        LoadBSDSocketBase
         CALLLIB gethostbyname
       EndDataStorage
     MOVEM.L (SP)+,A0/D2
@@ -1787,21 +1998,21 @@ _SocketReuseAddr_LibraryOpen:
     MOVE.L (SP)+,D0
 
     TST.L D0
-    BNE .GetIPAddress
+    BNE _DnsGetHostAddressByName_GetIPAddress
 
     RestoreStackFunction
 
     MOVE.L ChVide(A5),D3
     Ret_String
 
-.GetIPAddress:
+_DnsGetHostAddressByName_GetIPAddress:
     MOVE.L D0,A0
     MOVE.L 16(A0),A1 ; **h_addr_list
     MOVE.L (A1),A1 ; *h_addr_list
     MOVE.L (A1),D0 ; h_addr_list[0]
 
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB Inet_NtoA
     EndDataStorage
 
@@ -1809,27 +2020,32 @@ _SocketReuseAddr_LibraryOpen:
     MOVE.L A2,-(SP)
       MOVEQ #0,D3
 
-.GetIPAddressLength:
+_DnsGetHostAddressByName_GetIPAddressLength:
       ADDQ #1,D3
       TST.B (A2)+
-      BNE .GetIPAddressLength
+      BNE _DnsGetHostAddressByName_GetIPAddressLength
     MOVE.L (SP)+,A2
 
+    SUBQ #1,D3
     MOVE.L D3,D4
+
     AND.W #$FFFE,D3
     ADDQ #2,D3
 
     Rjsr L_Demande ; string is in A0/A1
     LEA 2(A0,D3.W),A1
     MOVE.L A1,HiChaine(A5)
-    MOVE.L A0,D3
+    MOVE.L A0,A1
+
+    MOVE.W D4,(A1)+
 
-    MOVE.W D4,(A0)+
     SUBQ #1,D4
 
-.KeepCopying:
-    MOVE.B (A2,D4),(A0,D4)
-    DBRA D4,.KeepCopying
+_DnsGetHostAddressByName_KeepCopying:
+    MOVE.B (A2)+,(A1)+
+    DBRA D4,_DnsGetHostAddressByName_KeepCopying
+
+    MOVE.L A0,D3
 
     RestoreStackFunction
 
@@ -1844,7 +2060,7 @@ _SocketReuseAddr_LibraryOpen:
 ; - - - - - - - - - - - - -
     PreserveStackFunction
 
-    MOVE.L D3,D4    ; milliseconds
+    MOVE.L D3,D4    ; milliseconts
     MOVE.L (A3)+,D0 ; socket id
 
     EnsureBSDSocketLibrary _SocketSetTimeout_LibraryOpen
@@ -1866,7 +2082,7 @@ _SocketSetTimeout_LibraryOpen:
     MOVE.L (A0)+,(A1)+
     SUB.L #8,A1 ; go back
 
-    WithDataStorageToA3
+    WithDataStorage
       ; socket is d0
       MOVE.L #SOL_SOCKET,D1 ; Level
       MOVE.L #$1005,D2 ; SO_SNDTIMEO
@@ -1874,7 +2090,7 @@ _SocketSetTimeout_LibraryOpen:
       MOVEQ #8,D3
 
       MOVEM.L D0/A0,-(SP)
-        LoadBSDSocketBaseFromA3
+        LoadBSDSocketBase
         CALLLIB setsockopt
 
         TST.L D0
@@ -1885,7 +2101,7 @@ _SocketSetTimeout_LibraryOpen:
       MOVE.L #$1006,D2 ; SO_RCVTIMEO
       MOVEQ #8,D3
 
-      LoadBSDSocketBaseFromA3
+      LoadBSDSocketBase
       CALLLIB setsockopt
 
     EndDataStorage
@@ -1912,17 +2128,17 @@ _SocketSetTimeout_Fail:
     Lib_Par SocketCloseSocket
 ; - - - - - - - - - - - - -
     PreserveStackFunction
-    EnsureBSDSocketLibrary .LibraryOpen
+    EnsureBSDSocketLibrary _SocketCloseSocket_LibraryOpen
 
     RestoreStackFunction
     Ret_Int
 
-.LibraryOpen:
+_SocketCloseSocket_LibraryOpen:
 
     MOVE.L D3,D0
 
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB CloseSocket
     EndDataStorage
 
@@ -1939,7 +2155,12 @@ _SocketSetTimeout_Fail:
     Lib_Par SocketHerrno
 ; - - - - - - - - - - - - -
     PreserveStackFunction
+    EnsureBSDSocketLibrary _SocketHerrno_LibraryOpen
 
+    RestoreStackFunction
+    Ret_Int
+
+_SocketHerrno_LibraryOpen:
     ; set up tag list memory and place for herrno to go
     Dlea AcceptScratchArea,A0
     MOVE.L A0,A2
@@ -1952,13 +2173,13 @@ _SocketSetTimeout_Fail:
     MOVE.L 0,(A0)+
     MOVE.L A2,A0
 
-    WithDataStorageToA3
-      LoadBSDSocketBaseFromA3
+    WithDataStorage
+      LoadBSDSocketBase
       CALLLIB SocketBaseTagList
     EndDataStorage
 
     TST.L D0
-    BEQ .success
+    BEQ _SocketHerrno_success
 
     ; failed
     MOVE.L #-1,D3
@@ -1966,7 +2187,7 @@ _SocketSetTimeout_Fail:
     RestoreStackFunction
     Ret_Int
 
-.success
+_SocketHerrno_success:
     MOVE.L (A1),D3
 
     RestoreStackFunction

src/Constants.s

@@ -1,43 +0,0 @@
-; bsdsocket library stuff
-; ported from the various C include headers
-SOCK_STREAM EQU 1
-PF_INET     EQU 2
-AF_INET     EQU PF_INET
-IPPROTO_TCP EQU 6
-
-INADDR_ANY  EQU 0
-
-FIONBIO     EQU $8004667E
-FIONASYNC   EQU $8004667D
-
-SOL_SOCKET  EQU $FFFF
-SO_REUSEADDR EQU $4
-
-MAX_SOCKETS EQU 64
-
-len_sockaddr_in        EQU 16
-sockaddr_in_sin_len    EQU 0
-sockaddr_in_sin_family EQU 1
-sockaddr_in_sin_port   EQU 2
-sockaddr_in_sin_addr   EQU 4
-
-; global errors
-Error_OtherError             EQU -1
-Error_LibraryNotOpen         EQU -2
-Error_PortOutOfRange         EQU -11
-Error_FdsetOutOfRange        EQU -11
-Error_UnableToBind           EQU -12
-
-; socket herrno and tag lists
-; built from:
-; * https://wiki.amigaos.net/amiga/autodocs/bsdsocket.doc.txt
-; * https://github.com/deplinenoise/amiga-sdk/blob/master/netinclude/amitcp/socketbasetags.h
-; * http://amigadev.elowar.com/read/ADCD_2.1/Includes_and_Autodocs_2._guide/node012E.html
-
-TAG_USER EQU (1<<31)
-SBTF_REF EQU $8000
-SBTB_CODE EQU 1
-SBTS_CODE EQU $3FFF
-SBTC_HERRNO EQU 6
-
-HerrnoTag EQU (TAG_USER|SBTF_REF|((SBTC_HERRNO&SBTS_CODE)<<SBTB_CODE))

src/LongDivide.s

@@ -1,43 +0,0 @@
-; d0 = value to be divided
-; d1 = divisor
-; returns:
-; d0 = divided value
-; d1 = remainder
-LongDivideD0ByD1 MACRO
-  CMP.L D0,D1
-  BMI _LongDivide_StartDivide\@
-
-  MOVE.L D0,D1
-  MOVEQ #0,D0
-  BRA _LongDivide_Skip\@
-
-_LongDivide_StartDivide\@:
-
-  MOVEM.L D2-D4,-(SP)
-    MOVEQ #0,D2      ; remainder
-    MOVE.L #31,D3    ; bit tracking
-                     ; d4 tracks the status register
-
-_LongDivide_ContinueDivide\@:
-    ASL.L #1,D0
-    SCS D4      ; bit that got rolled out
-    AND.L #1,D4
-    ROL.L #1,D2
-    ADD.L D4,D2 ; roll the value onto the remainder
-
-    MOVE.L D2,D4
-    SUB.L D1,D4
-
-    BMI _LongDivide_NotDivisible\@
-    ADDQ #1,D0
-    MOVE.L D4,D2
-
-_LongDivide_NotDivisible\@:
-    DBRA D3,_LongDivide_ContinueDivide\@
-    MOVE.L D2,D1
-  MOVEM.L (SP)+,D2-D4
-
-_LongDivide_Skip\@:
-  ENDM
-
-

src/absdsocket

@@ -9,5 +9,4 @@ FAILAT 21
 copy AMOSPro_System:APSystem/AMOSPro_BSDSocket.lib AMOSPro_System:APSystem/AMOSPro_BSDSocket.lib.bak
 FAILAT 10
 copy AMOSPro_BSDSocket.Lib AMOSPro_System:APSystem/
-;use an amos file here that includes the plugin to quickly build a test program
-;apcmp "aqua_test_plugin.amos" inclib
+apcmp "/test/TestSuite.amos" inclib

src/fd_set.s

@@ -1,47 +0,0 @@
-; fdset macros
-EnsureValidFdset MACRO
-    CMP.L #MaxFd_sets,\1
-    BLT \2
-
-    MOVE.L #Error_FdsetOutOfRange,D3
-    RestoreStackFunction
-    Ret_Int
-    ENDM
-
-EnsureValidFdsetBit MACRO
-    CMP.L #64,\1
-    BGE _EnsureValidFdsetBit_Fail\@
-    BRA \2
-_EnsureValidFdsetBit_Fail\@:
-    MOVE.L \3,D3
-    RestoreStackFunction
-    Ret_Int
-    ENDM
-
-; LeaFdset fd_set reg,target
-LeaFdset MACRO
-    MOVE.L \1,-(SP)
-    Dlea fd_sets,\2 ; base of all, these are longs
-    ROL.L #3,\1     ; multiply by 8
-    ADD.L \1,\2     ; add to base of all
-    MOVE.L (SP)+,\1
-    ENDM
-
-; LeaFdsetForBit fd_set reg,target address,target bit in address
-LeaFdsetForBit MACRO
-  LeaFdset \1,\2 ; get fdset base address in \2
-  MOVE.L D3,-(SP)
-    MOVE.L \3,D3 ; Put target bit into D3
-    ROR.L #5,D3  ; lop off the first 5 bits
-    AND.L #$7,D3 ; only keep the top three
-    ROL.L #2,D3  ; multiply by 4
-    ADD.L D3,\2  ; add that value to the fdset address
-
-    AND.L #$1F,\3 ; only keep 0-31 in \3
-
-    MOVEQ #1,D3
-    ROL.L \3,D3   ; shift that bit left as many as target
-    MOVE.L D3,\3  ; put that in the target
-  MOVE.L (SP)+,D3
-
-  ENDM

test/TestSuite.basic

@@ -0,0 +1,354 @@
+' BSD Socket Extension Test Suite
+'
+' Exercise all known functionality of the extension and write
+' a report file detailing the result.
+
+Screen Open 0,640,200,4,Hires
+
+_FILE_HANDLE=1
+Dim _CONTEXT$(10)
+_CONTEXT_INDEX=0
+
+Global _FILE_HANDLE,_CONTEXT$(),_CONTEXT_INDEX
+
+Procedure _ADD_TO_REPORT[MESSAGE$]
+   _CONTEXT_STRING$=""
+   For I=0 To _CONTEXT_INDEX-1
+      _CONTEXT_STRING$=_CONTEXT_STRING$+_CONTEXT$(I)
+      If I<>(_CONTEXT_INDEX-1)
+         _CONTEXT_STRING$=_CONTEXT_STRING$+"/"
+      End If 
+   Next I
+   _OUTPUT$="["+_CONTEXT_STRING$+"] "+MESSAGE$
+   Print #_FILE_HANDLE,_OUTPUT$
+   Print _OUTPUT$
+   ' ensure line is printed on screen to catch crashes
+   Wait Vbl 
+End Proc
+
+Procedure _BEGIN_CONTEXT[NAME$]
+   _CONTEXT$(_CONTEXT_INDEX)=NAME$
+   _CONTEXT_INDEX=_CONTEXT_INDEX+1
+End Proc
+
+Procedure _END_CONTEXT
+   _CONTEXT_INDEX=_CONTEXT_INDEX-1
+End Proc
+
+Open Out _FILE_HANDLE,"report.txt"
+
+_BEGIN_CONTEXT["Socket Library Open"]
+_BEGIN_CONTEXT["Open Library"]
+
+_LIBRARY_ADDRESS=Socket Library Open
+_ADD_TO_REPORT[Str$(_LIBRARY_ADDRESS)]
+
+_END_CONTEXT
+
+If _LIBRARY_ADDRESS=0
+   _ADD_TO_REPORT["bsdsocket.library not available, ending tests"]
+   _END_CONTEXT
+   Goto _FINISH_SUITE
+End If 
+
+_BEGIN_CONTEXT["Double open"]
+_NEW_LIBRARY_ADDRESS=Socket Library Open
+_ADD_TO_REPORT[Str$(_NEW_LIBRARY_ADDRESS)]
+_END_CONTEXT
+
+_END_CONTEXT
+
+
+_BEGIN_CONTEXT["Socket Create Inet Socket"]
+SOCKET=Socket Create Inet Socket
+_ADD_TO_REPORT[Str$(SOCKET)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Reuse Addr"]
+RESULT=Socket Reuse Addr(SOCKET)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Set Nonblocking"]
+_BEGIN_CONTEXT["False"]
+RESULT=Socket Set Nonblocking(SOCKET,False)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["True"]
+RESULT=Socket Set Nonblocking(SOCKET,True)
+_ADD_TO_REPORT[Str$(RESULT)]
+_ADD_TO_REPORT["Preserving this state for rest of tests"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Dns Get Address By Name$"]
+
+_BEGIN_CONTEXT["Bad domain name"]
+IP$=Dns Get Address By Name$("u8dsf93jsdfoiodsoi.sdfjdsoifueru.sadfasdsdasd")
+Print IP$
+_ADD_TO_REPORT[IP$]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["localhost"]
+IP$=Dns Get Address By Name$("localhost")
+_ADD_TO_REPORT[IP$]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["aminet.net"]
+IP$=Dns Get Address By Name$("aminet.net")
+Print IP$
+_ADD_TO_REPORT[IP$]
+_ADD_TO_REPORT["Using this IP address for connection tests"]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Returned string can be manipulated"]
+_ADD_TO_REPORT["Cat"+IP$+"Dog"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Connect"]
+_BEGIN_CONTEXT["port too high"]
+RESULT=Socket Connect(SOCKET To IP$,999999)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["blank ip"]
+RESULT=Socket Connect(SOCKET To "",80)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["invalid ip -- requires reopening failed socket"]
+RESULT=Socket Connect(SOCKET To "999.999.999.999",80)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Close Socket"]
+RESULT=Socket Close Socket(SOCKET)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+' re-set up this socket after a failed connection
+SOCKET=Socket Create Inet Socket
+_=Socket Set Nonblocking(SOCKET,True)
+
+_BEGIN_CONTEXT["aminet IP ("+IP$+") from above"]
+RESULT=Socket Connect(SOCKET To IP$,80)
+_ADD_TO_REPORT[Str$(RESULT)+" (ok to be -1, will Wait Async Writing next)"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Wait Async Writing"]
+
+_BEGIN_CONTEXT["With unconnected socket"]
+OTHER_SOCKET=Socket Create Inet Socket
+_=Socket Set Nonblocking(OTHER_SOCKET,True)
+
+_BEGIN_CONTEXT["2 second timeout"]
+RESULT=Socket Wait Async Writing(OTHER_SOCKET,2000)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Zero timeout"]
+RESULT=Socket Wait Async Writing(OTHER_SOCKET,0)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Connected socket"]
+_BEGIN_CONTEXT["Two second timeout"]
+RESULT=Socket Wait Async Writing(SOCKET,2000)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Zero timeout"]
+RESULT=Socket Wait Async Writing(SOCKET,0)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Attempt to get actual connection"]
+For TRIES=0 To 10
+  RESULT=Socket Wait Async Writing(SOCKET,500)
+  _ADD_TO_REPORT[Str$(RESULT)]
+  If RESULT>0
+    Exit 
+  End If 
+Next TRIES
+_END_CONTEXT
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Get Host"]
+_BEGIN_CONTEXT["socket id too high"]
+RESULT=Socket Get Host(999999)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["socket id is valid"]
+RESULT=Socket Get Host(SOCKET)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Get Port"]
+_BEGIN_CONTEXT["socket id too high"]
+RESULT=Socket Get Port(999999)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["socket id is valid"]
+RESULT=Socket Get Port(SOCKET)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Inet Ntoa$"]
+_BEGIN_CONTEXT["Use the socket host"]
+RESULT$=Socket Inet Ntoa$(Socket Get Host(SOCKET))
+_ADD_TO_REPORT[RESULT$]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["String can be manipulated"]
+_ADD_TO_REPORT["Cat"+RESULT$+"Dog"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Send and Socket Send$"]
+HTTP_REQUEST_HEADERS$="GET / HTTP/1.0"+Chr$(10)+"Host: amiga"+Chr$(10)+Chr$(10)
+
+_BEGIN_CONTEXT["Socket send$ first half"]
+FIRST_HALF$=Left$(HTTP_REQUEST_HEADERS$,10)
+RESULT=Socket Send$(SOCKET,FIRST_HALF$)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket send second half"]
+SECOND_HALF_START=Varptr(HTTP_REQUEST_HEADERS$)+10
+SECOND_HALF_LENGTH=Len(HTTP_REQUEST_HEADERS$)-10
+RESULT=Socket Send(SOCKET,SECOND_HALF_START,SECOND_HALF_LENGTH)
+_ADD_TO_REPORT[Str$(RESULT)]
+
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket wait Async Reading"]
+_BEGIN_CONTEXT["With unconnected socket"]
+_BEGIN_CONTEXT["2 second timeout"]
+RESULT=Socket Wait Async Reading(OTHER_SOCKET,2000)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_BEGIN_CONTEXT["Zero timeout"]
+RESULT=Socket Wait Async Reading(OTHER_SOCKET,0)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["With aminet socket"]
+_BEGIN_CONTEXT["2 second timeout"]
+RESULT=Socket Wait Async Reading(SOCKET,2000)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Zero timeout"]
+RESULT=Socket Wait Async Reading(SOCKET,0)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+_END_CONTEXT
+
+_END_CONTEXT
+
+'Goto _FINISH_SUITE
+
+_BEGIN_CONTEXT["Socket Recv$ and Socket Recv"]
+_BEGIN_CONTEXT["Socket Recv$"]
+_BEGIN_CONTEXT["Read 20 characters"]
+RESULT$=Socket Recv$(SOCKET,20)
+_ADD_TO_REPORT[RESULT$]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["String can be manipulated"]
+_ADD_TO_REPORT["Cat"+RESULT$+"Dog"]
+_END_CONTEXT
+
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Socket Read"]
+Reserve As Work 20,20
+
+_BEGIN_CONTEXT["Read 20 bytes"]
+RESULT=Socket Recv(SOCKET To Start(20),20)
+_ADD_TO_REPORT[Str$(RESULT)]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Data was read"]
+BASE$="12345678901234567890"
+For I=0 To 19
+   Mid$(BASE$,I+1,1)=Chr$(Peek(Start(20)+I))
+Next I
+_ADD_TO_REPORT[BASE$]
+_END_CONTEXT
+
+Erase 20
+_END_CONTEXT
+_END_CONTEXT
+
+_FINISH_SUITE:
+
+_BEGIN_CONTEXT["Socket Library Close"]
+_BEGIN_CONTEXT["Close"]
+Socket Library Close 
+_ADD_TO_REPORT["Success"]
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Double close"]
+Socket Library Close 
+_ADD_TO_REPORT["Success"]
+_END_CONTEXT
+_END_CONTEXT
+
+_BEGIN_CONTEXT["Call functions with library closed"]
+_=Socket Set Nonblocking(0,True)
+_ADD_TO_REPORT["Socket Set Nonblocking"]
+_=Socket Reuse Addr(0)
+_ADD_TO_REPORT["Socket Reuse Addr"]
+_=Socket Create Inet Socket
+_ADD_TO_REPORT["Socket Create Inet Socket"]
+_=Socket Connect(0 To "",0)
+_ADD_TO_REPORT["Socket Connect"]
+_=Socket Bind(0 To "",0)
+_ADD_TO_REPORT["Socket Bind"]
+_=Socket Listen(0)
+_ADD_TO_REPORT["Socket Listen"]
+_=Socket Accept(0)
+_ADD_TO_REPORT["Socket Accept"]
+_=Socket Wait Async Reading(0,0)
+_ADD_TO_REPORT["Socket Wait Async Reading"]
+_=Socket Wait Async Writing(0,0)
+_ADD_TO_REPORT["Socket Wait Async Writing"]
+_=Socket Set Timeout(0,0)
+_ADD_TO_REPORT["Socket Set Timeout"]
+_=Socket Close Socket(0)
+_ADD_TO_REPORT["Socket Close Socket"]
+_=Socket Send$(0,"")
+_ADD_TO_REPORT["Socket Send$"]
+_=Socket Send(0,0,0)
+_ADD_TO_REPORT["Socket Send"]
+_$=Socket Recv$(0,0)
+_ADD_TO_REPORT["Socket Recv$"]
+_=Socket Recv(0 To 0,0)
+_ADD_TO_REPORT["Socket Recv"]
+_=Socket Get Host(0)
+_ADD_TO_REPORT["Socket Get Host"]
+_=Socket Get Port(0)
+_ADD_TO_REPORT["Socket Get Port"]
+_$=Socket Inet Ntoa$(0)
+_ADD_TO_REPORT["Socket Inet Ntoa$"]
+_=Socket Errno
+_ADD_TO_REPORT["Socket Errno"]
+_=Socket Herrno
+_ADD_TO_REPORT["Socket Herrno"]
+_$=Dns Get Address By Name$("")
+_ADD_TO_REPORT["Dns Get Address By Name$"]
+_END_CONTEXT
+
+Close 1