= Guard
Guard is a command line tool that easily handle events on files modifications.
== Features
- {FSEvent}[http://en.wikipedia.org/wiki/FSEvents] support on Mac OS X 10.5+ (without RubyCocoa!, {rb-fsevent gem, >= 0.3.5}[https://rubygems.org/gems/rb-fsevent] required).
- {Inotify}[http://en.wikipedia.org/wiki/Inotify] support on Linux ({rb-inotify gem, >= 0.5.1}[https://rubygems.org/gems/rb-inotify] required).
- Polling on the other operating systems (help us to support more OS).
- Automatic & Super fast (when polling is not used) files modifications detection (even new files are detected).
- Growl notifications ({growlnotify}[http://growl.info/documentation/growlnotify.php] & {growl gem}[https://rubygems.org/gems/growl] required).
- Libnotify notifications ({libnotify gem}[https://rubygems.org/gems/libnotify] required).
- Tested on Ruby 1.8.6, 1.8.7 & 1.9.2.
== Install
Install the gem:
$ gem install guard
Add it to your Gemfile (inside the test group):
gem 'guard'
Generate an empty Guardfile with:
$ guard init
Add the guards you need to your Guardfile (see the existing guards below).
=== On Mac OS X
Install the rb-fsevent gem for {FSEvent}[http://en.wikipedia.org/wiki/FSEvents] support:
$ gem install rb-fsevent
Install the Growl gem if you want notification support:
$ gem install growl
And add it to you Gemfile:
gem 'growl'
=== On Linux
Install the rb-inotify gem for {inotify}[http://en.wikipedia.org/wiki/Inotify] support:
$ gem install rb-inotify
Install the Libnotify gem if you want notification support:
$ gem install libnotify
And add it to you Gemfile:
gem 'libnotify'
== Usage
Just launch Guard inside your Ruby / Rails project with:
$ guard [start]
or if you use Bundler, to run the Guard executable specific to your bundle:
$ bundle exec guard
== Command line options
Shell can be cleared after each change with:
$ guard --clear
$ guard -c # shortcut
The guards to start can be specified by group (see the Guardfile DSL below) specifying the --group (or -g) option:
$ guard --group group_name another_group_name
$ guard -g group_name another_group_name # shortcut
Options list is available with:
$ guard help [TASK]
== Signal handlers
Signal handlers are used to interact with Guard:
- Ctrl-C - Calls each guard's stop method, in the same order they are declared in the Guardfile, and then quits Guard itself.
- Ctrl-\\ - Calls each guard's run_all method, in the same order they are declared in the Guardfile.
- Ctrl-Z - Calls each guard's reload method, in the same order they are declared in the Guardfile.
== Available Guards
- {guard-bundler}[https://github.com/guard/guard-bundler] by {Yann Lugrin}[https://github.com/yannlugrin]
- {guard-coffeescript}[https://github.com/guard/guard-coffeescript] by {Michael Kessler}[https://github.com/netzpirat]
- {guard-compass}[https://github.com/guard/guard-compass] by {Olivier Amblet}[https://github.com/oliamb]
- {guard-cucumber}[https://github.com/guard/guard-cucumber] by {Michael Kessler}[https://github.com/netzpirat]
- {guard-ego}[https://github.com/guard/guard-ego] by {Fabio Kuhn}[https://github.com/mordaroso]
- {guard-jammit}[https://github.com/guard/guard-jammit] by {Pelle Braendgaard}[https://github.com/pelle]
- {guard-krl}[https://github.com/guard/guard-krl] by {Michael Farmer}[https://github.com/mikefarmer]
- {guard-less}[https://github.com/guard/guard-less] by {Brendan Erwin}[https://github.com/brendanjerwin]
- {guard-livereload}[https://github.com/guard/guard-livereload] by {Thibaud Guillaume-Gentil}[https://github.com/thibaudgg]
- {guard-minitest}[https://github.com/guard/guard-minitest] by {Yann Lugrin}[https://github.com/yannlugrin]
- {guard-nanoc}[https://github.com/guard/guard-nanoc] by {Yann Lugrin}[https://github.com/yannlugrin]
- {guard-passenger}[https://github.com/guard/guard-passenger] by {Fabio Kuhn}[https://github.com/mordaroso]
- {guard-prove}[https://github.com/guard/guard-prove] by {Marian Schubert}[https://github.com/maio]
- {guard-pusher}[https://github.com/guard/guard-pusher] by {Klaus Hartl}[https://github.com/carhartl]
- {guard-rspec}[https://github.com/guard/guard-rspec] by {Thibaud Guillaume-Gentil}[https://github.com/thibaudgg]
- {guard-sass}[https://github.com/guard/guard-sass] by {Joshua Hawxwell}[https://github.com/hawx]
- {guard-shell}[https://github.com/guard/guard-shell] by {Joshua Hawxwell}[https://github.com/hawx]
- {guard-soca}[https://github.com/guard/guard-soca] by {Luke Amdor}[https://github.com/rubbish]
- {guard-spork}[https://github.com/guard/guard-spork] by {Thibaud Guillaume-Gentil}[https://github.com/thibaudgg]
- {guard-stendhal}[https://github.com/guard/guard-stendhal] by {Josep Mª Bach}[https://github.com/txus]
- {guard-test}[https://github.com/guard/guard-test] by {Rémy Coutable}[https://github.com/rymai]
- {guard-webrick}[https://github.com/guard/guard-webrick] by {Fletcher Nichol}[https://github.com/fnichol]
=== Add a guard to your Guardfile
Add it to your Gemfile (inside the test group):
gem ''
Insert default guard's definition to your Guardfile by running this command:
$ guard init
You are good to go!
== Guardfile DSL
The Guardfile DSL consists of just three simple methods: guard, watch & group.
Required:
- The guard method allows you to add a guard with an optional hash of options.
- The watch method allows you to define which files are supervised by this guard. An optional block can be added to overwrite the paths sent to the run_on_change guard method or to launch any arbitrary command.
Optional:
- The group method allows you to group several guards together. Groups to be run can be specified with the Guard DSL option --group (or -g). This comes in handy especially when you have a huge Guardfile and want to focus your development on a certain part.
Example:
group 'backend' do
guard 'bundler' do
watch('Gemfile')
end
guard 'rspec', :cli => '--color --format doc' do
# Regexp watch patterns are matched with Regexp#match
watch(%r{^spec/.+_spec\.rb})
watch(%r{^lib/(.+)\.rb}) { |m| "spec/lib/#{m[1]}_spec.rb" }
watch(%r{^spec/models/.+\.rb}) { ["spec/models", "spec/acceptance"] }
watch(%r{^spec/.+\.rb}) { `say hello` }
# String watch patterns are matched with simple '=='
watch('spec/spec_helper.rb') { "spec" }
end
end
group 'frontend' do
guard 'coffeescript', :output => 'public/javascripts/compiled' do
watch(%r{^app/coffeescripts/.+\.coffee})
end
guard 'livereload' do
watch(%r{^app/.+\.(erb|haml)})
end
end
== Create a new guard
Creating a new guard is very easy, just create a new gem (bundle gem if you use Bundler) with this basic structure:
lib/
guard/
guard-name/
templates/
Guardfile (needed for guard init )
guard-name.rb
Guard::GuardName (in lib/guard/guard-name.rb) must inherit from Guard::Guard and should overwrite at least one of the five basic Guard::Guard instance methods. Example:
require 'guard'
require 'guard/guard'
module Guard
class GuardName < Guard
def initialize(watchers=[], options={})
super
# init stuff here, thx!
end
# ================
# = Guard method =
# ================
# If one of those methods raise an exception, the Guard::GuardName instance
# will be removed from the active guards.
# Called once when Guard starts
# Please override initialize method to init stuff
def start
true
end
# Called on Ctrl-C signal (when Guard quits)
def stop
true
end
# Called on Ctrl-Z signal
# This method should be mainly used for "reload" (really!) actions like reloading passenger/spork/bundler/...
def reload
true
end
# Called on Ctrl-/ signal
# This method should be principally used for long action like running all specs/tests/...
def run_all
true
end
# Called on file(s) modifications
def run_on_change(paths)
true
end
end
end
Please take a look at the existing guards' source code (see the list above) for more concrete example.
== Development
- Source hosted at {GitHub}[https://github.com/guard/guard].
- Report Issues/Questions/Feature requests on {GitHub Issues}[https://github.com/guard/guard/issues].
Pull requests are very welcome! Make sure your patches are well tested. Please create a topic branch for every separate change
you make.
== Authors
{Thibaud Guillaume-Gentil}[https://github.com/thibaudgg]