193 lines
5.8 KiB
OpenEdge ABL
193 lines
5.8 KiB
OpenEdge ABL
IFND LIBRARIES_CONFIGREGS_I
|
|
LIBRARIES_CONFIGREGS_I SET 1
|
|
**
|
|
** $Filename: libraries/configregs.i $
|
|
** $Release: 1.3 $
|
|
**
|
|
** register and bit definitions for expansion boards
|
|
**
|
|
** (C) Copyright 1986,1987,1988 Commodore-Amiga, Inc.
|
|
** All Rights Reserved
|
|
**
|
|
|
|
** Expansion boards are actually organized such that only one nibble per
|
|
** word (16 bits) are valid information. This table is structured
|
|
** as LOGICAL information. This means that it never corresponds
|
|
** exactly with a physical implementation.
|
|
**
|
|
** The expansion space is logically split into two regions:
|
|
** a rom portion and a control portion. The rom portion is
|
|
** actually stored in one's complement form (except for the
|
|
** er_type field).
|
|
|
|
|
|
STRUCTURE ExpansionRom,0
|
|
UBYTE er_Type
|
|
UBYTE er_Product
|
|
UBYTE er_Flags
|
|
UBYTE er_Reserved03
|
|
UWORD er_Manufacturer
|
|
ULONG er_SerialNumber
|
|
UWORD er_InitDiagVec
|
|
UBYTE er_Reserved0c
|
|
UBYTE er_Reserved0d
|
|
UBYTE er_Reserved0e
|
|
UBYTE er_Reserved0f
|
|
LABEL ExpansionRom_SIZEOF
|
|
|
|
STRUCTURE ExpansionControl,0
|
|
UBYTE ec_Interrupt ; interrupt control register
|
|
UBYTE ec_Reserved11
|
|
UBYTE ec_BaseAddress ; set new config address
|
|
UBYTE ec_Shutup ; don't respond, pass config out
|
|
UBYTE ec_Reserved14
|
|
UBYTE ec_Reserved15
|
|
UBYTE ec_Reserved16
|
|
UBYTE ec_Reserved17
|
|
UBYTE ec_Reserved18
|
|
UBYTE ec_Reserved19
|
|
UBYTE ec_Reserved1a
|
|
UBYTE ec_Reserved1b
|
|
UBYTE ec_Reserved1c
|
|
UBYTE ec_Reserved1d
|
|
UBYTE ec_Reserved1e
|
|
UBYTE ec_Reserved1f
|
|
LABEL ExpansionControl_SIZEOF
|
|
|
|
**
|
|
** many of the constants below consist of a triplet of equivalent
|
|
** definitions: xxMASK is a bit mask of those bits that matter.
|
|
** xxBIT is the starting bit number of the field. xxSIZE is the
|
|
** number of bits that make up the definition. This method is
|
|
** used when the field is larger than one bit.
|
|
**
|
|
** If the field is only one bit wide then the xxB_xx and xxF_xx convention
|
|
** is used (xxB_xx is the bit number, and xxF_xx is mask of the bit).
|
|
**
|
|
|
|
** manifest constants */
|
|
E_SLOTSIZE EQU $10000
|
|
E_SLOTMASK EQU $ffff
|
|
E_SLOTSHIFT EQU 16
|
|
|
|
** these define the two free regions of Zorro memory space.
|
|
** THESE MAY WELL CHANGE FOR FUTURE PRODUCTS!
|
|
E_EXPANSIONBASE EQU $e80000
|
|
E_EXPANSIONSIZE EQU $080000
|
|
E_EXPANSIONSLOTS EQU 8
|
|
|
|
E_MEMORYBASE EQU $200000
|
|
E_MEMORYSIZE EQU $800000
|
|
E_MEMORYSLOTS EQU 128
|
|
|
|
|
|
|
|
******* ec_Type definitions */
|
|
|
|
** board type -- ignore "old style" boards */
|
|
ERT_TYPEMASK EQU $c0
|
|
ERT_TYPEBIT EQU 6
|
|
ERT_TYPESIZE EQU 2
|
|
ERT_NEWBOARD EQU $c0
|
|
|
|
|
|
** type field memory size */
|
|
ERT_MEMMASK EQU $07
|
|
ERT_MEMBIT EQU 0
|
|
ERT_MEMSIZE EQU 3
|
|
|
|
|
|
** other bits defined in type field */
|
|
BITDEF ERT,CHAINEDCONFIG,3
|
|
BITDEF ERT,DIAGVALID,4
|
|
BITDEF ERT,MEMLIST,5
|
|
|
|
|
|
** er_Flags byte -- for those things that didn't fit into the type byte */
|
|
BITDEF ERF,MEMSPACE,7 ; wants to be in 8 meg space. Also
|
|
; implies that board is moveable
|
|
BITDEF ERF,NOSHUTUP,6 ; board can't be shut up. Must not
|
|
; be a board. Must be a box that
|
|
; does not pass on the bus.
|
|
|
|
|
|
** interrupt control register */
|
|
BITDEF ECI,INTENA,1
|
|
BITDEF ECI,RESET,3
|
|
BITDEF ECI,INT2PEND,4
|
|
BITDEF ECI,INT6PEND,5
|
|
BITDEF ECI,INT7PEND,6
|
|
BITDEF ECI,INTERRUPTING,7
|
|
|
|
|
|
**************************************************************************
|
|
**
|
|
** these are the specifications for the diagnostic area. If the Diagnostic
|
|
** Address Valid bit is set in the Board Type byte (the first byte in
|
|
** expansion space) then the Diag Init vector contains a valid offset.
|
|
**
|
|
** The Diag Init vector is actually a word offset from the base of the
|
|
** board. The resulting address points to the base of the DiagArea
|
|
** structure. The structure may be physically implemented either four,
|
|
** eight, or sixteen bits wide. The code will be copied out into
|
|
** ram first before being called.
|
|
**
|
|
** The da_Size field, and both code offsets (da_DiagPoint and da_BootPoint)
|
|
** are offsets from the diag area AFTER it has been copied into ram, and
|
|
** "de-nibbleized" (if needed). Inotherwords, the size is the size of
|
|
** the actual information, not how much address space is required to
|
|
** store it.
|
|
**
|
|
** All bits are encoded with uninverted logic (e.g. 5 volts on the bus
|
|
** is a logic one).
|
|
**
|
|
** If your board is to make use of the boot facility then it must leave
|
|
** its config area available even after it has been configured. Your
|
|
** boot vector will be called AFTER your board's final address has been
|
|
** set.
|
|
**
|
|
**************************************************************************
|
|
|
|
STRUCTURE DiagArea,0
|
|
UBYTE da_Config ; see below for definitions
|
|
UBYTE da_Flags ; see below for definitions
|
|
UWORD da_Size ; the size (in bytes) of the total diag area
|
|
UWORD da_DiagPoint ; where to start for diagnostics, or zero
|
|
UWORD da_BootPoint ; where to start for booting
|
|
UWORD da_Name ; offset in diag area where a string
|
|
; identifier can be found (or zero if no
|
|
; identifier is present).
|
|
|
|
UWORD da_Reserved01 ; two words of reserved data. must be zero.
|
|
UWORD da_Reserved02
|
|
LABEL DiagArea_SIZEOF
|
|
|
|
; da_Config definitions
|
|
DAC_BUSWIDTH EQU $C0 ; two bits for bus width
|
|
DAC_NIBBLEWIDE EQU $00
|
|
DAC_BYTEWIDE EQU $40
|
|
DAC_WORDWIDE EQU $80
|
|
|
|
DAC_BOOTTIME EQU $30 ; two bits for when to boot
|
|
DAC_NEVER EQU $00 ; obvious
|
|
DAC_CONFIGTIME EQU $10 ; call da_BootPoint when first configing the
|
|
; the device
|
|
DAC_BINDTIME EQU $20 ; run when binding drivers to boards
|
|
|
|
**
|
|
** These are the calling conventions for Diag or Boot area
|
|
**
|
|
** A7 -- points to at least 2K of stack
|
|
** A6 -- ExecBase
|
|
** A5 -- ExpansionBase
|
|
** A3 -- your board's ConfigDev structure
|
|
** A2 -- Base of diag/init area that was copied
|
|
** A0 -- Base of your board
|
|
**
|
|
** Your board should return a value in D0. If this value is NULL, then
|
|
** the diag/init area that was copied in will be returned to the free
|
|
** memory pool.
|
|
**
|
|
|
|
ENDC ; LIBRARIES_CONFIGREGS_I
|